2019 Audi Q5 S Line TDI Quattro S-A 2.0L Heavy oil · CKZ 4114

This Audi Q5 maintains an exemplary record of roadworthiness, distinguished by a total absence of failures or advisories across its recent testing history. The clean result from the most recent inspection on 20 March 2026 continues a trend of stability, confirming that the vehicle meets all DVSA safety and environmental standards without the recurring defects often seen in high-mileage examples. The vehicle has covered 127,215 miles over approximately seven years, representing a high annual accumulation of roughly 18,174 miles. While this suggests the engine has likely benefited from sustained motorway running, the total distance indicates significant wear on long-term consumables and structural components. At this mileage, the mechanical focus shifts from simple roadworthiness to the lifecycle of major drivetrain elements and suspension geometry. Given the high mileage and the Quattro all-wheel-drive configuration, a test drive should focus on the smoothness of the S-tronic transmission and the integrity of the drivetrain. Listen for any unusual humming or vibration during acceleration and deceleration, and ensure gear transitions are seamless without hesitation or judder. While the MOT record is clean, the physical wear on suspension bushes and coil springs is inevitable at this distance, so feel for any excessive steering play or instability during high-speed cornering. Verification of the service history is critical for this specific mileage, particularly regarding the timing belt and water pump intervals, as well as the transmission fluid changes. Ensure there is documented evidence of these major interventions, as their failure would be catastrophic. Additionally, inspect the underbody for any signs of oil misting around the engine seals or differential housings, which may not have reached the threshold of an MOT failure but would indicate the onset of age-related seal degradation.