2017 KIA Sportage 2.0L Diesel · CP17 EWF

The vehicle currently fails the MOT test on the 2026-06-18 date, indicating that the most recent inspection was conducted approximately three months prior to the current date. This suggests the vehicle has a maintenance history that is not stable, as the test results show a significant deterioration in performance over the last two years, with the most recent test failing on the 2026-05-19 date. The failure on the 2026-05-19 date is the most critical finding, as it confirms that the vehicle has not met the safety requirements for its age and mileage. The mileage pattern indicates a rapid accumulation of wear over the past two years, with the vehicle exceeding 64,566 miles in the second half of 2024. This rapid accumulation is particularly concerning given the vehicle's age of 9 years, which typically requires a minimum of 100,000 miles for a safe MOT. The gap between the 2024-06-07 and 2024-06-05 test results suggests that the vehicle may have been driven for over 300 miles between these two failures, which is a significant risk factor. The most recent test on the 2026-05-19 date is the only one that passed, but the failure on the 2026-06-18 date confirms that the vehicle has not been adequately maintained to the standard required for its age. To ensure roadworthiness, the buyer should inspect the vehicle for structural integrity and mechanical risks. The most critical component to check is the suspension, specifically the rear trailing arm and front bushing, which has been flagged as excessively worn and potentially detached in the 2024-06-05 test. Similarly, the brake discs have been identified as worn, pitted, or scored in both the 2024-06-05 and 2024-06-07 tests, indicating that the braking system is likely compromised. The buyer must also verify the condition of the registration plate and tyres, as these have been flagged as deteriorating in the 2024-06-07 and 2024-06-05 tests. A thorough physical inspection is required to assess the structural integrity of the chassis and the functional state of the suspension and braking components before proceeding with purchase.