2023 Cupra Born V2 EV Electric · DF23 ADV

The most recent MOT test conducted on 08 May 2026 resulted in a pass with no defects or advisories recorded. This indicates that the vehicle was found to be in a compliant state regarding all essential safety and environmental standards at the time of inspection. Based on this recent clean record, the maintenance trend appears stable, suggesting that the vehicle has not exhibited any immediate structural or mechanical failures that would necessitate urgent remedial work or indicate a pattern of neglect. With 24,729 miles recorded over approximately three years, the vehicle has averaged roughly 8,243 miles per annum. This is a standard usage rate for a modern electric vehicle, suggesting the car has been used regularly enough to prevent excessive component stagnation but not so heavily as to cause premature wear on the drivetrain or suspension. This moderate mileage profile is generally favourable, as it implies the vehicle has likely avoided the heavy-duty wear associated with high-mileage commercial or long-distance commuter use, which helps preserve the longevity of consumable components. As the MOT history is clean, your inspection should focus on age-related degradation and physical condition. On a test drive, pay close attention to the tyres; even with moderate mileage, check the sidewalls for any signs of perishing or cracking and inspect the tread for uneven wear which could signal tracking issues or worn suspension bushes. Because electric vehicles rely heavily on regenerative braking, the mechanical friction brakes may be subject to surface corrosion or binding calipers due to less frequent physical use. Listen for any squealing or grinding during braking and check the brake discs for excessive surface rust or pitting. Additionally, verify the service history to ensure that time-based maintenance, such as brake fluid replacements and cabin filter changes, has been performed according to the manufacturer's schedule. It is also prudent to check the health of the 12V auxiliary battery, as these can lose capacity if the vehicle has experienced periods of standing. Finally, listen for any knocks or clunks from the suspension when navigating uneven surfaces to ensure the coil springs and bushes remain in good condition. Ensuring all scheduled maintenance is documented will be vital for the continued reliability of the vehicle's electrical and mechanical systems.