2009 Land Rover Range Rover 3.6L Diesel · DX09 UDG

The most recent MOT test in July 2024 confirms this Range Rover remains roadworthy, though with persistent minor issues in the suspension and anti-roll bar linkages. The trend over the past three tests shows no significant deterioration—only the same recurring play in ball joints and suspension bushes, which, while not yet critical, indicate long-term neglect of these wear items. The absence of major failures or advisories in the last two tests suggests the vehicle has not suffered catastrophic wear, but the repeated flagging of suspension components implies deferred maintenance rather than urgent failure. The 2021 failure was largely due to tyre and brake pipe conditions, which were rectified before the subsequent pass, though the underlying corrosion and oil leaks persisted. Mileage accumulation averages around 9,100 miles annually, consistent with typical usage for a vehicle of this age. The gap between tests is standard, with no unusual spikes or prolonged periods of inactivity—though the 2021 failure and pass within 24 hours of each other suggests either rushed repairs or a last-minute MOT attempt. No major mileage jumps or drops are evident, reinforcing that wear patterns are likely genuine rather than artificially inflated or deflated. A buyer should prioritise a thorough inspection of the suspension, particularly the anti-roll bar linkages and front/rear lower arm bushes, which show consistent play. The corroded brake pipes and transmission oil leak from 2021 warrant verification that these have been addressed—grease or debris on the pipes could indicate a broader fluid contamination issue. The rear tyres in 2021 were dangerously close to the legal limit, so tread depth and edge wear should be checked again, along with the sills for any progression in corrosion, even if structural rigidity was deemed adequate last time. The lack of recent advisories is reassuring, but the suspension’s gradual degradation suggests proactive replacement of worn bushes and ball joints is advisable.