1987 Reliant Rialto 0.8L Petrol · E233 FAA
1987 Reliant Rialto (0.8L, petrol). First registered 01 Dec 1987. Recorded mileage 59,380 miles. MOT valid until 18 Apr 2027. Taxed until 01 Apr 2027.
- Make & Model
- RELIANT RIALTO
- Year / Origin
- 1987 · Chelmsford
- Safety Recall
- Unknown
- MOT Status
- Valid until 18 Apr 2027
- Road Tax
- Taxed (01 Apr 2027)
- Recorded Mileage
- 59,380 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
E233 FAA Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 20/04/2026
- 59,380 miles recorded at latest MOT
- 1 historical MOT failure
- 7 defects noted at the latest MOT
- Recurring lighting items (8 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
E233 FAA MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1987 Reliant Rialto (E233 FAA) between March 2022 and April 2026.
The record contains 4 passes and 1 failure.
The most recent test on 20 April 2026 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Lighting (8 issues), Suspension (8 issues), Tyres (4 issues), Exhaust & Emissions (3 issues), Steering (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 34 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Rear Brake pipe leaking on a hydraulic braking system Leaking at cylinder. (1.1.11 (b) (ii))”; “Direction indicator not working (4.4.1 (a) (ii))”; “Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))”.
E233 FAA Mileage History
- 08/03/202258,984 mi
- 01/03/202359,168 mi+184 mi
- 12/06/202459,228 mi+60 mi
- 16/04/202659,371 mi+143 mi
- 20/04/202659,380 mi+9 mi
Average of roughly 96 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Reliant Reliant Rialto
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: RELIANT RIALTO
Known issues reported by owners and MOT testers.
- Front Suspension Swing-Arm and Steering Bush Wear(Moderate)
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head Warpage(Moderate)
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate Corrosion(Moderate)
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (E233 Series)
Vehicles registered in the same regional DVLA batch as E233FAA.
MERCEDES
UNKNOWN
LADA
RIVA
NISSAN
JUKE N-CONNECTA HEV CVT
VOLKSWAGEN
TRANSPORTER
VOLKSWAGEN
TRANSPORTER
KAWASAKI
KMX125
MERCEDES
CAMPER VAN
YAMAHA
VEMAX
CITROEN
2CV
PORSCHE
944
AUSTIN
MINI MAYFAIR
RENAULT
R5
RELIANT RIALTO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1987 model year cars.
- Front Suspension Swing-Arm and Steering Bush WearModerate
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head WarpageModerate
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate CorrosionModerate
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.