1987 Rolls Royce Silver Spirit 6.8L Petrol · E26 RRM
1987 Rolls Royce Silver Spirit (6.8L, petrol). First registered 26 Oct 1987. Recorded mileage 93,560 miles. MOT valid until 06 Jun 2027.
- Make & Model
- ROLLS ROYCE SILVER SPIRIT
- Year / Origin
- 1987 · Chelmsford
- Safety Recall
- Unknown
- MOT Status
- Valid until 06 Jun 2027
- Road Tax
- —
- Recorded Mileage
- 93,560 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 6.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
E26 RRM Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 08/06/2026
- 93,560 miles recorded at latest MOT
- 2 historical MOT failures
- 4 defects noted at the latest MOT
- Recurring tyres items (13 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
E26 RRM MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1987 Rolls Royce Silver Spirit (E26 RRM) between April 2024 and June 2026.
The record contains 3 passes and 2 failures.
The most recent test on 08 June 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Tyres (13 issues), Lighting (5 issues), Brakes (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 14 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))”; “Nearside Front Position lamp not working (4.2.1 (a) (ii))”; “Offside Front Position lamp not working (4.2.1 (a) (ii))”.
E26 RRM Mileage History
- 16/04/202490,803 mi
- 16/04/202490,803 mi
- 01/05/202592,148 mi+1,345 mi
- 10/05/202592,155 mi+7 mi
- 08/06/202693,560 mi+1,405 mi
Average of roughly 1,286 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rolls-Royce Rolls-Royce Silver Spirit
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROLLS ROYCE SILVER SPIRIT
Known issues reported by owners and MOT testers.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System Failure(Serious)
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride Harshness(Moderate)
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-By(Moderate)
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Similar Vehicles
Plate Neighbors
Batch Registration Neighbors (E26R Series)
Vehicles registered in the same regional DVLA batch as E26RRM.
FORD
MUSTANG
JAGUAR
XE
CITROEN
C4
AUDI
A1
VOLKSWAGEN
POLO
BMW
X6 XDRIVE30D M SPORT MHEV AUTO
JAGUAR
F-TYPE
FORD
KUGA ST-LINE X ED PHEV CVT
VOLKSWAGEN
GOLF
AUDI
Q3
MERCEDES-BENZ
C
BENELLI
BN 125 E5
ROLLS ROYCE SILVER SPIRIT Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1987 model year cars.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System FailureSerious
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride HarshnessModerate
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-ByModerate
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.