2005 Ford Mondeo 2.2L Diesel · EJ05 ABO

The most recent MOT test on 2024-10-12 confirms the vehicle passed without defects at 192,608 miles, marking a stable trend over the past two years. The record shows two consecutive failures in 2023 (September 23 and 25) at nearly identical mileages (192,584), both resolved within days, suggesting a temporary administrative or procedural issue rather than a persistent mechanical fault. Since 2022, the vehicle has maintained a clean MOT history, with no recurring advisories or defects—though the double failure in 2023 warrants scrutiny of whether the tester flagged the same underlying issue twice. The absence of advisories in the last two passes indicates no ongoing concerns with suspension bushes, coil springs, or binding calipers, but the 2023 failures imply a need for verification of brake system integrity or exhaust emissions compliance. The mileage progression reveals a consistent annual average of around 9,172 miles, which is typical for a vehicle of this age and model. There are no abrupt jumps or prolonged stagnation periods, though the gap between the 2022 and 2023 tests (just over a year) aligns with the standard MOT interval. The near-identical mileage readings in 2023 (192,584) for both the failure and subsequent pass suggests the vehicle was not driven between tests, which could indicate temporary storage or a delayed inspection. This pattern does not inherently signal neglect, but it does highlight the need to confirm whether the vehicle has been subjected to prolonged inactivity, which could accelerate corrosion or fluid degradation. Given the lack of recorded defects, the most critical areas for an in-person inspection should focus on components commonly overlooked in older vehicles. The double MOT failure in 2023—despite identical mileages—raises caution around brake system reliability, particularly rear calipers or binding pads, as these are frequent causes of test failures. Exhaust emissions systems should also be checked for leaks or catalytic converter efficiency, as these often trigger repeated failures if unresolved. Structural integrity, particularly around wheel arches, sills, and suspension mounts, warrants thorough visual inspection for corrosion, as does the underbody for rust penetration in critical areas like the subframe or longitudinal rails. Finally, verify the condition of coil springs, shock absorbers, and steering rack bushes, as these degrade incrementally and may not always trigger MOT failures until they reach critical wear.