2009 Ford Fiesta 1.4L Petrol · EO09 LRZ

A consistent record of roadworthiness characterizes this vehicle, though the latest test on 2026-06-16 introduces new concerns regarding the structural integrity of the rear wheels. While the history shows a pattern of passing tests with minimal intervention, the current advisories for slightly distorted nearside and offside rear wheels suggest potential impact damage or fatigue. This represents a shift from previous years where defects were primarily cosmetic or related to minor consumables. With 104,753 miles recorded over seventeen years, the vehicle has averaged approximately 6,162 miles per year, which is typical for its age. This steady rate of accumulation suggests regular use rather than prolonged periods of standing, meaning the mechanical wear on the drivetrain and suspension is likely consistent with the vehicle's age. There are no significant gaps in the testing history to suggest extended periods of inactivity. Attention should be directed toward the rear wheels, as the distortion noted in June 2026 can lead to tyre imbalance or premature wear. During a test drive, feel for any unusual vibrations through the chassis or a slight shudder at higher speeds, which would indicate the wheels are no longer true. The 2022 advisory regarding oil misting on the nearside rear shock absorber should also be verified; a visual inspection for active leaks or a tendency for the rear of the car to bounce excessively over undulating surfaces would indicate the damper has degraded further. The 2020 records flagged worn and pitted front brake discs and thin pads, and while these may have been replaced, the current braking performance must be assessed. Listen for any grinding or rhythmic pulsing during deceleration and check for a soft or spongy pedal feel. Additionally, the deterioration of the registration plates and the previous failure for insufficient washer fluid are minor points, but the overall physical condition of the exterior trim and the functionality of the windscreen wipers should be confirmed to ensure they meet current standards.