2023 Fiat 500 Mhev 1.0L Petrol · EU23 YLM

The most recent MOT test conducted on 24 March 2026 resulted in a pass with no recorded defects or advisories. This indicates that the vehicle met all essential safety and environmental standards at the time of inspection. Based on the available data, the maintenance trend appears stable, as there are no historical failures or recurring issues documented in the recent testing cycle to suggest a pattern of mechanical neglect or a worsening condition. The vehicle has covered 39,372 miles in approximately three years, which equates to an annual mileage of roughly 13,124 miles. This usage level is relatively high for a small city car, suggesting the vehicle has been used regularly for commuting or longer journeys rather than being used for occasional short trips. Mechanically, this higher mileage profile implies that wear and tear on consumable components, such as brake pads, discs, tyres, and suspension elements, will be more advanced than on a lower-mileage example. However, consistent usage is often beneficial for preventing issues associated with vehicles that sit idle, such as brake disc corrosion or fluid degradation. As the MOT record is clean, your physical inspection should focus on wear-related items consistent with the mileage. During the test drive, listen closely for any knocks, clunks, or rattles from the suspension, which could indicate worn bushes or dampers. Test the braking performance carefully; look for any shudder through the pedal or steering wheel, which may indicate warped discs, or any pulling to one side that could suggest binding calipers. Inspect the tyres for even tread wear across the width of the tyre, as unevenness can be a symptom of incorrect wheel alignment or worn suspension geometry. Additionally, verify the service history to ensure that oil changes and manufacturer-specified maintenance have been carried out at the correct intervals, which is vital for the long-term reliability of the mild-hybrid powertrain. Check the engine bay for any evidence of fluid leaks from gaskets or hoses and inspect the 12V battery for any signs of terminal corrosion. Given the hybrid nature of the vehicle, ensure the electrical systems and charging functions operate without error. Finally, check the age of the tyres to ensure they are not perishing or showing sidewall cracking, despite the relatively recent manufacture date of the car.