2016 Audi Q3 2.0L Diesel · EW60 BAZ

The vehicle presents a stable roadworthiness status, evidenced by the most recent inspection results. The test conducted on 23 May 2025 at 116,679 miles resulted in a clean pass, indicating that all mechanical and safety components currently meet minimum standards. While a failure was recorded in June 2024, the immediate rectification and subsequent pass without further advisories suggest the owner is proactive in addressing identified faults. The overall trend shows no signs of worsening mechanical degradation or recurring structural failures. The mileage pattern is consistent with a ten-year-old vehicle, averaging approximately 11,700 miles per annum. Between December 2022 at 87,893 miles and December 2023 at 102,883 miles, the car covered 14,990 miles, showing a period of higher usage. The more recent interval of 9,801 miles between June 2024 and May 2025 indicates a return to normal usage levels. This regularity suggests the vehicle is driven consistently, which is generally beneficial for maintaining seals and mechanical components compared to the issues associated with long periods of standing. A buyer should focus the physical inspection on the suspension and braking system, as the vehicle has exceeded 110,000 miles. At this mileage, control arm bushes, coil springs, and shock absorbers often show signs of wear that an MOT test might miss. The June 2024 failure at 106,876 miles indicates a specific component required immediate attention; the buyer should verify that this specific fault was properly repaired and does not recur. Inspect for any surface corrosion on the undercarriage and check the condition of the brake discs and calipers, as high mileage accelerates the wear on the Audi's braking components.