1989 Ford Sierra 2.0L Petrol · F711 FYD

This Ford Sierra presents a stable record of roadworthiness, culminating in a clean pass on 3 June 2026 with no defects or advisories recorded. While the 2025 testing cycle saw a failure due to excessive carbon monoxide emissions, incorrect headlamp aim, and ineffective windscreen wipers, these were primarily tune-related or superficial issues that were promptly rectified. The absence of structural corrosion, brake deterioration, or suspension failures in the recent history suggests a vehicle that has maintained its mechanical integrity despite its age. An average annual accumulation of approximately 2,140 miles over thirty-seven years indicates a low-usage profile. For a vehicle of this vintage, such low mileage typically results in reduced wear on the drivetrain and internal engine components. However, the low mileage suggests the vehicle may have spent significant time stationary, which can affect the longevity of rubber seals and flexible hoses. The consistency of the recent MOT history indicates the vehicle has remained in active use rather than suffering from long-term stagnation. Attention should be paid to the front tyre wear patterns, as both the nearside and offside front tyres were flagged as worn close to the legal limit or worn on the edge during the 2025 inspections. During a test drive, the buyer should check for any steering pull or instability, which would indicate that the edge wear was caused by incorrect wheel alignment or worn suspension bushes. Confirm that the tyres have since been replaced and that the vehicle tracks straight without intervention. Given the previous failure for excessive carbon monoxide emissions, the engine should be monitored for stability at idle and a lack of excessive smoke upon cold starting. The effectiveness of the windscreen wipers and the correct projection of the headlamp beams should be verified, as these were specific points of failure in the previous year. Listen for any unusual knocks or rattles from the exhaust system to ensure the previous emissions issues were not symptomatic of a deeper exhaust leak or component failure.