1965 Jaguar MK X 4.2L Petrol · FAD 522C

This Jaguar Mk X has maintained a consistent MOT pass status since its most recent test on 2025-09-03, with no defects recorded at 84,484 miles. The record shows a stable pattern of annual testing, though the single failure in September 2023—unusually noted without defects—stands out as an anomaly rather than a trend. The vehicle’s most recent inspection occurred just ten months ago, which is acceptable given its age, though the lack of any advisories or warnings in the last two tests suggests either diligent servicing or a vehicle that has not yet developed significant wear. The absence of recurring faults in the MOT history implies that major systems like suspension, brakes, and exhaust have not yet required attention, but this does not preclude hidden issues in components not routinely tested. The recorded mileage of 84,484 miles over 61 years equates to approximately 1,385 miles per year, a figure unusually low for a vehicle of this vintage. The consistency of mileage increments—ranging from 83,020 to 84,484 miles over four years—indicates minimal rapid usage, which could mean the car has spent extended periods stored or driven infrequently. This low mileage does not necessarily correlate with better mechanical condition, as prolonged inactivity can accelerate deterioration in rubber seals, fuel systems, and battery health. The gap between the 2023 failure (with no defects) and the subsequent pass suggests either a retest or a minor oversight, but no clear pattern of neglect or rapid wear emerges from the data. Given the lack of MOT-reported faults, a buyer should prioritise an independent inspection of critical high-wear areas not routinely checked in standard MOTs. The suspension—particularly coil springs, bushes, and shock absorbers—should be examined for dry rot or excessive play, as these components degrade over time regardless of mileage. Brake systems, including calipers, pads, and hydraulic lines, warrant scrutiny, especially if the vehicle has been stored for prolonged periods, as moisture can cause corrosion or binding. Structural integrity, particularly around the chassis and body seams, should be assessed for corrosion, as classic vehicles are prone to rust in areas like the sills, wheel arches, and subframes. Finally, the electrical system, including wiring harnesses and the battery, should be tested, as age-related failures are common in older vehicles with limited driving history.