2017 Land Rover Discovery Sport 2.0L Diesel · FE17 FCC

The most recent MOT inspection conducted in June 2026 resulted in a clean pass with no recorded defects. When evaluating the long-term maintenance trend, the vehicle shows an improving profile. While the 2022 and 2023 records highlighted necessary attention regarding brake pad wear and tyre degradation, the absence of advisories in the 2025 and 2026 tests strongly suggests that these consumables were replaced and the vehicle has been maintained effectively in recent years. With a recorded mileage of 72,021 miles over approximately nine years, the vehicle has averaged roughly 8,000 miles per annum. This represents typical, moderate usage for a Land Rover Discovery Sport, avoiding the extremes of either excessive high-mileage wear or the potential mechanical stagnation associated with very low-mileage vehicles. This level of usage is generally favourable for maintaining the health of engine components and preventing issues such as carbon build-up or brake seizure from prolonged periods of standing. During your physical inspection and test drive, you should verify that the previous tyre and brake advisories have been fully resolved. Check the current tread depth and ensure there is no uneven wear across the tyre profiles, which could indicate alignment issues or worn suspension bushes. Regarding the braking system, listen for any grinding or squealing and feel for any pedal pulsation or shuddering, which could indicate warped brake discs or binding calipers. Given the vehicle's age, also inspect the condition of the suspension components and drive shafts for any signs of perished rubber or weeping seals. Beyond the recorded history, you should perform age-appropriate checks on fluid degradation and rubber components. Inspect the windscreen for any new stone chips or cracks, noting the previous minor damage recorded in 2024. Check the condition of the 12V battery and ensure the service history confirms that interval-based maintenance, such as coolant changes and timing belt replacements if applicable to this specific engine, has been performed. Finally, examine the underside for any signs of structural corrosion or exhaust system degradation, particularly around mounting points and joins, to ensure long-term integrity.