2007 Yamaha YBR125 0.1L Petrol · FG57 ABF

The latest recorded MOT pass on 12 September 2022 showed no defects, suggesting the motorcycle was in a roadworthy condition at that specific point in time. However, as the last test was conducted four years ago, the current maintenance trend is impossible to establish with certainty. The absence of recent testing means the vehicle's current mechanical compliance is unverified, and the buyer should proceed with the assumption that the vehicle's condition may have changed significantly since the last recorded inspection. The total mileage of 20,644 miles represents a very low annual average of approximately 1,087 miles over the vehicle's 19-year lifespan. While this low mileage suggests minimal wear on the engine, piston rings, and gearbox, it also indicates a high probability of the vehicle having spent extended periods stationary. In the context of a motorcycle, low usage can often mask underlying issues such as fluid degradation, seal shrinkage, and corrosion that are not captured by mileage alone. Due to the age and low usage profile, a thorough physical inspection is essential. Prioritise checking the tyres for signs of perishing or sidewall cracking, as age-related rubber degradation can lead to sudden failure regardless of tread depth. Inspect the drive chain for rust, seizing, or improper tension, and check the carburettor and fuel lines for any signs of degradation from old fuel. The battery should be tested for its ability to hold a charge, as long periods of standing often lead to permanent capacity loss. Examine the braking system for any evidence of binding calipers or heavily corroded brake discs, which frequently occurs when a vehicle is not regularly ridden. Check the fork seals for any signs of oil weeping and inspect all rubber hoses and various bushes for cracking or hardening. It is also critical to check the age and condition of the brake fluid, as it absorbs moisture over time and can cause internal component damage. Finally, ensure all electrical connections are clean and free from oxidation to guarantee the reliability of the lighting and ignition systems.