2018 Volkswagen Crafter 2.0L Diesel · FN68 VEX

A recurring pattern of brake component degradation is the primary mechanical consideration for this vehicle, as evidenced by the most recent MOT pass on 01 September 2026. While the vehicle has maintained a continuous pass record since a reversing lamp failure in 2021, the emergence of consecutive advisories regarding the front brake discs being worn, pitted, or scored in both 2025 and 2026 indicates a developing trend in braking surface deterioration. This suggests that while the vehicle remains roadworthy, the front braking system is approaching a point where component replacement will be necessary to prevent future failure. The recorded mileage of 26,579 miles over approximately eight years represents a significantly low annual accumulation of roughly 3,322 miles. This usage profile is notably low for a Volkswagen Crafter, a vehicle typically utilised for higher-intensity commercial transport. Mechanically, such low annual mileage can imply less wear on heavy-duty drivetrain components and suspension linkages, but it can also correlate with the observed pitting on the brake discs, which often occurs when a vehicle is driven infrequently, allowing moisture to sit on the metal surfaces. Prospective buyers should pay close attention to the braking performance during a test drive to assess the extent of the pitting and scoring noted in the latest advisories. Listen for any rhythmic clicking or grinding noises from the front end during low-speed manoeuvres and feel for any pedal judder or vibration through the footwell when applying the brakes at various speeds. The presence of pitting can sometimes lead to uneven braking force or a spongy pedal feel if the surface integrity is compromised. Additionally, the 2024 advisory regarding both rear tyres being worn close to the legal limit or worn on the edges should be cross-referenced with the current tread depth and tyre condition. During the inspection, check for any signs of uneven wear patterns on the rear tyres, which could indicate issues with wheel alignment or suspension geometry. Given the low mileage and the specific advisories recorded, a thorough check of the braking system's physical condition and the integrity of the tyre treads is essential to ensure the vehicle meets immediate operational requirements.