2011 Volkswagen Golf 1.2L Petrol · FX61 YUB

The vehicle is currently roadworthy but the maintenance history reveals a trend of reactive repairs rather than proactive upkeep. While it passed its MOT on 11 December 2025 at 152,967 miles, it had failed just one day prior due to a split offside front drive shaft boot. The most recent inspection shows persistent issues with the suspension geometry, specifically worn front arm bushes and an anti-roll bar linkage, indicating that the suspension components are reaching the end of their functional life and require ongoing attention. At 152,967 miles over 15 years, the Golf has followed a consistent usage pattern of approximately 10,000 miles per year, which is typical for a vehicle of this age. The records show annual testing intervals, with roughly 4,600 miles covered between December 2023 and December 2024, and another 4,700 miles before the most recent tests. This steady accumulation suggests the car is used regularly, though the mileage justifies the wear seen on rubber components and suspension bushings. A buyer must conduct a close physical inspection of the structural integrity and the rear suspension. The December 2023 failure noted a nearside rear suspension arm that was seriously weakened by corrosion, a critical structural fault that must be verified as fully replaced and treated to prevent further rust-spread. Additionally, the persistent oil leak noted in the last three consecutive tests, while currently described as not excessive, needs a definitive source identified to ensure it is not a developing engine or gearbox seal failure. The front end requires further scrutiny regarding the suspension arm bushes and drive shaft, which have been flagged as worn or deteriorated across the last three years. The history of tyres being worn to the legal limit in late 2023 suggests the previous owner neglected basic consumable maintenance until failure occurred. Given the recurring advisories on anti-roll bar linkages and bushes, the buyer should budget for immediate suspension work to restore the vehicle's handling and safety.