1991 Rover Metro 1.1L Petrol · H370 BMX
1991 Rover Metro (1.1L, petrol). First registered 24 May 1991. Recorded mileage 41,180 miles. MOT expired on 13 Nov 2026. Currently declared SORN.
- Make & Model
- ROVER METRO
- Year / Origin
- 1991 · Bournemouth
- Safety Recall
- Unknown
- MOT Status
- Expired on 13 Nov 2026
- Road Tax
- SORN
- Recorded Mileage
- 41,180 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.1L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
H370 BMX Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 14/11/2025
- 41,180 miles recorded at latest MOT
- 3 historical MOT failures
- 5 defects noted at the latest MOT
- Recurring exhaust & emissions items (8 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
H370 BMX MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1991 Rover Metro (H370 BMX) between September 2024 and November 2025.
The record contains 2 passes and 3 failures.
The most recent test on 14 November 2025 was a pass, although the earlier record includes 3 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Exhaust & Emissions (8 issues), Tyres (6 issues), Lighting (4 issues), Brakes (3 issues), Bodywork (3 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 22 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))”; “Exhaust emissions - engine idle speed too high (8.2.1.2 (e))”; “Front Exhaust has a major leak of exhaust gases exhaust box (6.1.2 (a))”.
H370 BMX Mileage History
- 06/09/202439,427 mi
- 06/09/202439,433 mi+6 mi
- 27/10/202541,177 mi+1,744 mi
- 14/11/202541,178 mi+1 mi
- 14/11/202541,180 mi+2 mi
Average of roughly 1,474 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rover Rover Metro
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROVER METRO
Known issues reported by owners and MOT testers.
- Hydragas Suspension Depressurisation and Fluid Pipe Corrosion(Serious)
The Rover Metro replaced the Austin Metro's harsh, separate suspension units with interconnected front-to-rear Alex Moulton Hydragas displacers and interconnected fluid pipes. Over time, the internal nitrogen gas charge in the displacer spheres gradually permeates through the rubber diaphragm, and external steel connection pipes rot in British winter salt. This causes the car to sag onto its bump stops, ruining the ride quality and destroying front tyre alignment. Regassing displacers requires specialist equipment and rare replacement units.
- K-Series Cylinder Head Gasket Failure (Early SPi and MPi)(Serious)
The Rover Metro debuted Rover's all-aluminium K-Series engine (1.1 8v, 1.4 8v, and 1.4 16v GTi). Early K-Series engines utilised plastic locating dowels between the cylinder block and head, a small 3.5-litre cooling capacity, and an elastomer-bead cylinder head gasket. Thermal expansion differentials and minor coolant loss quickly cause the head gasket to blow, warping the lightweight aluminium cylinder head and contaminating the engine oil with coolant.
- A-Pillar, Sill, and Rear Wheel Arch Corrosion(Moderate)
While the Rover Metro received galvanised zinc coating on certain vulnerable lower panels compared to the Austin original, British road salt takes a heavy toll on the A-pillars, lower sills, jacking points, and rear wheel arch returns. Water also penetrates behind the front wing seals and drains into the A-pillar box section, rotting the door hinge mountings and lower windscreen corners. Structural rust in these zones is a primary cause of MOT failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (H370 Series)
Vehicles registered in the same regional DVLA batch as H370BMX.
VAUXHALL
ASTRA
VOLKSWAGEN
GOLF
ROVER
METRO
VOLKSWAGEN
GOLF
HONDA
H100S-J
FORD
RANGER
BMW
3 SERIES
BMW
ROYAL ENFIELD
BULLET
SUZUKI
GSXR750
VOLKSWAGEN
TRANSPORTER
FORD
ESCORT
ROVER METRO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1991 model year cars.
- Hydragas Suspension Depressurisation and Fluid Pipe CorrosionSerious
The Rover Metro replaced the Austin Metro's harsh, separate suspension units with interconnected front-to-rear Alex Moulton Hydragas displacers and interconnected fluid pipes. Over time, the internal nitrogen gas charge in the displacer spheres gradually permeates through the rubber diaphragm, and external steel connection pipes rot in British winter salt. This causes the car to sag onto its bump stops, ruining the ride quality and destroying front tyre alignment. Regassing displacers requires specialist equipment and rare replacement units.
- K-Series Cylinder Head Gasket Failure (Early SPi and MPi)Serious
The Rover Metro debuted Rover's all-aluminium K-Series engine (1.1 8v, 1.4 8v, and 1.4 16v GTi). Early K-Series engines utilised plastic locating dowels between the cylinder block and head, a small 3.5-litre cooling capacity, and an elastomer-bead cylinder head gasket. Thermal expansion differentials and minor coolant loss quickly cause the head gasket to blow, warping the lightweight aluminium cylinder head and contaminating the engine oil with coolant.
- A-Pillar, Sill, and Rear Wheel Arch CorrosionModerate
While the Rover Metro received galvanised zinc coating on certain vulnerable lower panels compared to the Austin original, British road salt takes a heavy toll on the A-pillars, lower sills, jacking points, and rear wheel arch returns. Water also penetrates behind the front wing seals and drains into the A-pillar box section, rotting the door hinge mountings and lower windscreen corners. Structural rust in these zones is a primary cause of MOT failure.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.