1991 Daimler Double SIX 5.3L Petrol · H523 JCV
1991 Daimler Double SIX (5.3L, petrol). First registered 01 Jan 1991. Recorded mileage 94,521 km. MOT valid until 25 Mar 2027.
- Make & Model
- DAIMLER DOUBLE SIX
- Year / Origin
- 1991 · Bournemouth
- Safety Recall
- Unknown
- MOT Status
- Valid until 25 Mar 2027
- Road Tax
- —
- Recorded Odometer
- 94,521 km
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 5.3L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
H523 JCV Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 26/03/2026
- 94,521 km recorded at latest MOT
- 1 historical MOT failure
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
H523 JCV MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1991 Daimler Double Six (H523 JCV) between July 2022 and March 2026.
The record contains 4 passes and 1 failure.
The most recent test on 26 March 2026 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
H523 JCV Odometer History
- 20/07/202289,878 km
- 20/07/202289,878 km
- 02/08/202393,956 km+4,078 km
- 10/12/202494,248 km+292 km
- 26/03/202694,521 km+273 km
Average of roughly 1,261 km per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Daimler Daimler Double Six
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: DAIMLER DOUBLE SIX
Known issues reported by owners and MOT testers.
- V12 Engine Valley Fuel Rail Hose Degradation and Engine Bay Fire Risk(Serious)
The 5.3-litre and 6.0-litre V12 engines generate intense under-bonnet heat soak, particularly in the central valley where the fuel injection rail and short rubber injector feed hoses sit. Over time, heat cycles harden the rubber hoses, causing micro-cracking and loss of clamp tension. Modern ethanol-blended UK fuels (E5/E10) accelerate this embrittlement, allowing high-pressure fuel to spray or seep directly onto the distributor, HT leads, and hot exhaust manifolds, causing catastrophic under-bonnet fires. Preventative maintenance requires renewing all fuel rail hoses and injector link pipes with ethanol-rated synthetic hoses (such as Gates Barricade) every five to seven years.
- V12 Cooling System Silt Accumulation, Radiator Furring and Dropped Valve Seats(Serious)
The Jaguar all-aluminium V12 requires meticulous cooling maintenance due to its massive heat output and 20 individual coolant hoses. Neglected coolant changes allow mineral silt and corrosion sediment to clog the lower tubes of the cross-flow radiator and rear cylinder water passages. When localized overheating occurs, the aluminium cylinder head expands faster than the pressed-in steel valve seat inserts. Once press-fit tolerance is lost during extreme heat cycling, a valve seat insert loosens and drops into the combustion chamber, destroying the piston and bending valves. Remedying dropped seats requires an engine-out rebuild and peening or staking replacement inserts.
- Magneti Marelli and Lucas Ignition Amplifier / Distributor Rotor Breakdown(Serious)
Late Daimler Double Six models utilise a Magneti Marelli dual-coil digital ignition system, while earlier cars feature Lucas OPUS or Constant Energy systems. On Marelli-equipped models, high secondary ignition resistance from aged spark plugs or degraded HT leads causes internal electrical arcing through the distributor rotor body directly to the distributor drive shaft. This burns a pinhole through the rotor, killing spark to an entire six-cylinder bank. Because the fuel injectors continue spraying fuel into the dead cylinders, raw petrol floods into the catalytic converter, causing it to overheat, glow red-hot, and ignite underbody fires. Regular rotor and cap renewal is mandatory.
- Inboard Rear Brake Caliper Heat Seizure and Differential Output Seal Leaks(Moderate)
On Series 1, 2, and 3 Double Six saloons, the independent rear suspension mounts the brake calipers and discs inboard against the Salisbury differential casing. The intense radiant heat generated by the heavy V12 powertrain and exhaust pipes bakes the caliper piston seals and differential output shaft seals. Hardened diff seals allow hypoid gear oil to leak directly onto the inboard brake discs and pads, drastically reducing stopping power. Concurrently, caliper pistons seize in their bores from heat and moisture accumulation, causing severe brake drag. Rectifying the assembly requires lowering the complete rear axle subframe.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (H523 Series)
Vehicles registered in the same regional DVLA batch as H523JCV.
VOLKSWAGEN
GOLF
MAZDA
MX-5
FORD
TRANSIT
ROVER
MINI
HONDA
NSX
TRIKE
EUNOS
ROADSTER
SUZUKI
ER
DUCATI
UNKNOWN
BMW
3 SERIES
YAMAHA
MITSUBISHI
SHOGUN
DAIMLER DOUBLE SIX Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1991 model year cars.
- V12 Engine Valley Fuel Rail Hose Degradation and Engine Bay Fire RiskSerious
The 5.3-litre and 6.0-litre V12 engines generate intense under-bonnet heat soak, particularly in the central valley where the fuel injection rail and short rubber injector feed hoses sit. Over time, heat cycles harden the rubber hoses, causing micro-cracking and loss of clamp tension. Modern ethanol-blended UK fuels (E5/E10) accelerate this embrittlement, allowing high-pressure fuel to spray or seep directly onto the distributor, HT leads, and hot exhaust manifolds, causing catastrophic under-bonnet fires. Preventative maintenance requires renewing all fuel rail hoses and injector link pipes with ethanol-rated synthetic hoses (such as Gates Barricade) every five to seven years.
- V12 Cooling System Silt Accumulation, Radiator Furring and Dropped Valve SeatsSerious
The Jaguar all-aluminium V12 requires meticulous cooling maintenance due to its massive heat output and 20 individual coolant hoses. Neglected coolant changes allow mineral silt and corrosion sediment to clog the lower tubes of the cross-flow radiator and rear cylinder water passages. When localized overheating occurs, the aluminium cylinder head expands faster than the pressed-in steel valve seat inserts. Once press-fit tolerance is lost during extreme heat cycling, a valve seat insert loosens and drops into the combustion chamber, destroying the piston and bending valves. Remedying dropped seats requires an engine-out rebuild and peening or staking replacement inserts.
- Magneti Marelli and Lucas Ignition Amplifier / Distributor Rotor BreakdownSerious
Late Daimler Double Six models utilise a Magneti Marelli dual-coil digital ignition system, while earlier cars feature Lucas OPUS or Constant Energy systems. On Marelli-equipped models, high secondary ignition resistance from aged spark plugs or degraded HT leads causes internal electrical arcing through the distributor rotor body directly to the distributor drive shaft. This burns a pinhole through the rotor, killing spark to an entire six-cylinder bank. Because the fuel injectors continue spraying fuel into the dead cylinders, raw petrol floods into the catalytic converter, causing it to overheat, glow red-hot, and ignite underbody fires. Regular rotor and cap renewal is mandatory.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.