2019 KIA Niro 1.6L Hybrid electric (clean) · HF69 UXN

Consistent roadworthiness defines the history of this Kia Niro, which has maintained a clean record across three of its four annual MOT inspections. The most recent assessment on 17 November 2025 resulted in a pass with no defects recorded, continuing a trend of stability following the 2023 test. While the 2023 inspection identified advisories regarding the wear patterns on the front tyres, the subsequent two years of testing indicate these concerns were addressed, as no further issues have been logged since that time. Accumulating only 23,348 miles over seven years results in an average annual usage of approximately 3,335 miles, placing this vehicle significantly below the typical mileage for a car of this age. This infrequent use pattern necessitates a focus on components that may suffer from lack of regular movement rather than high-mileage fatigue. While the drivetrain and chassis have not shown signs of premature degradation in the official records, the low mileage suggests that the vehicle may have experienced extended periods of inactivity, which can lead to the binding of mechanical parts or the settling of fluids. During your test drive, pay close attention to the braking system, as vehicles with low annual mileage are prone to surface corrosion on the brake discs. Listen for any grinding noises or sensations of pedal judder, which would indicate that the discs or pads have become seized or unevenly worn due to infrequent operation. Furthermore, test the steering responsiveness at both low and high speeds to ensure the tyres, which were previously noted for uneven wear, are not causing any pulling or vibrations through the steering column. Given the history of uneven tyre wear noted in 2023, it is advisable to inspect the suspension components for any signs of misalignment or play in the bushes and linkages. When driving over uneven road surfaces, listen for any knocking or clunking sounds from the front end, which could suggest that the suspension geometry was affected by the previous tyre wear issues. Confirm that the vehicle tracks straight on a level road surface and that there is no abnormal resistance when turning the steering wheel from lock to lock, as this will help verify the current health of the steering and suspension systems.