1972 Lancia Fulvia 1.6L Petrol · HHU 510K
1972 Lancia Fulvia (1.6L, petrol). First registered 31 Jul 1972. Recorded mileage 45,333 miles. MOT valid until 17 Oct 2027.
- Make & Model
- LANCIA FULVIA
- Year / Origin
- 1972 · Bournemouth
- Safety Recall
- Unknown
- MOT Status
- Valid until 17 Oct 2027
- Road Tax
- —
- Recorded Mileage
- 45,333 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.6L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
HHU 510K Key Findings
- 3 MOT tests recorded
- Latest MOT passed on 19/10/2026
- 45,333 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
HHU 510K MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
3 MOT tests are recorded for this 1972 Lancia Fulvia (HHU 510K) between April 2024 and October 2026.
The record contains 3 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
HHU 510K Mileage History
- 18/04/202441,724 mi
- 08/10/202544,365 mi+2,641 mi
- 19/10/202645,333 mi+968 mi
Average of roughly 1,442 miles per year across 3 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Lancia Lancia Fulvia
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: LANCIA FULVIA
Known issues reported by owners and MOT testers.
- Front Subframe and Mounting Outrigger Corrosion(Serious)
The front subframe carries the entire weight of the canted V4 engine, transmission, steering idlers and transverse leaf suspension. Water and mud thrown up by the front tyres settle into the enclosed mounting boxes, rear outriggers and inner wing attachment points, causing severe structural rot. In advanced stages of corrosion, structural stress causes vertical cracks to propagate through the front wheel arches and allows the subframe to twist under cornering loads.
- Twin Solex Carburettor Out-of-Sync and Fuel Washing(Moderate)
Most production Fulvias breathe through twin sidedraught Solex (or Dell'Orto/Weber) carburettors feeding the narrow-angle V4. Over time, vibration, linkage wear and degraded rubber mounting blocks cause the throttle butterflies to fall out of synchronisation. An unbalanced fuel mixture causes lumpy idling, persistent hesitation off idle, bore fuel washing, fouled spark plugs and hot-starting difficulties on UK pump fuels.
- Brake Caliper Seizure and Handbrake Linkage Seizure(Moderate)
Fulvias rely on four-wheel disc brakes: early Series 1 cars use Dunlop calipers without servo assistance, while Series 2 and 3 models use Girling calipers with an independent rear handbrake caliper mechanism. Infrequent use and damp UK garage storage lead to caliper piston pitting, binding pads, uneven braking balance and seized handbrake pivots, resulting in severe drag and overheated rear discs.
- Cooling System Silt Accumulation and Water Pump Weep(Serious)
The narrow-angle V4 relies on a compact water pump and narrow aluminium cylinder head cooling jackets. Over decades of ownership, infrequent coolant flushing and the use of tap water cause silt buildup and galvanic corrosion in the radiator and waterways. Impellers erode and the mechanical water pump seal weeps, causing creeping temperatures in traffic, localized cylinder head hotspots and eventual head gasket failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (HHU5 Series)
Vehicles registered in the same regional DVLA batch as HHU510K.
ROLLS ROYCE
SILVER SHADOW
YAMAHA
RD350
LAMBRETTA
SUPER MONZA
HONDA
CD200
LAVERDA
JOTA
LAND ROVER
UNKNOWN
LAND ROVER
109
MG
BGT
VOLKSWAGEN
MOTOR CARAVAN
FORD
ESCORT
LANCIA FULVIA Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1972 model year cars.
- Front Subframe and Mounting Outrigger CorrosionSerious
The front subframe carries the entire weight of the canted V4 engine, transmission, steering idlers and transverse leaf suspension. Water and mud thrown up by the front tyres settle into the enclosed mounting boxes, rear outriggers and inner wing attachment points, causing severe structural rot. In advanced stages of corrosion, structural stress causes vertical cracks to propagate through the front wheel arches and allows the subframe to twist under cornering loads.
- Twin Solex Carburettor Out-of-Sync and Fuel WashingModerate
Most production Fulvias breathe through twin sidedraught Solex (or Dell'Orto/Weber) carburettors feeding the narrow-angle V4. Over time, vibration, linkage wear and degraded rubber mounting blocks cause the throttle butterflies to fall out of synchronisation. An unbalanced fuel mixture causes lumpy idling, persistent hesitation off idle, bore fuel washing, fouled spark plugs and hot-starting difficulties on UK pump fuels.
- Brake Caliper Seizure and Handbrake Linkage SeizureModerate
Fulvias rely on four-wheel disc brakes: early Series 1 cars use Dunlop calipers without servo assistance, while Series 2 and 3 models use Girling calipers with an independent rear handbrake caliper mechanism. Infrequent use and damp UK garage storage lead to caliper piston pitting, binding pads, uneven braking balance and seized handbrake pivots, resulting in severe drag and overheated rear discs.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.