2016 Yamaha YP 0.1L Petrol · HN66 NFJ

The Yamaha YP’s MOT history presents a concerning inconsistency in recent testing, with two consecutive failures in early 2026—first on 30 January at 63,815 miles, then a pass just nine days later at 63,906 miles—yet neither test recorded any defects. This suggests either an administrative error or a vehicle that narrowly avoided failures despite potential underlying issues. The most recent pass in February 2026, with no advisories or defects, offers little reassurance given the lack of transparency in the preceding failure. The absence of any recorded faults across three tests spanning over three years implies either meticulous maintenance or, more likely, a vehicle that has slipped through with only the most superficial checks. Without visible defects, the trend remains unclear, though the rapid back-to-back retesting in early 2026 is unusual and warrants closer scrutiny. The mileage accumulation of 63,906 miles over roughly 10 years aligns closely with the average for its age, suggesting either consistent but light use or prolonged periods of inactivity. The gap between the 2023 test (63,151 miles) and the 2026 failures (63,815–63,906 miles) indicates minimal driving—just 755 miles over nearly three years—raising questions about whether the vehicle has been stored or used sparingly. Such low mileage reduces wear on consumables like tyres and brakes but does not eliminate the risk of corrosion, fluid degradation, or seized components from prolonged disuse. The lack of mileage progression also means no recent wear patterns can be reliably assessed from the MOT alone. Given the sparse and inconsistent MOT record, a buyer should prioritise a thorough pre-purchase inspection, particularly focusing on components prone to neglect or silent failure. Check the suspension for degraded bushes, worn coil springs, or uneven tyre wear, as these often degrade even with low mileage. Inspect the brake system for binding calipers, uneven disc thickness, or fluid leaks, especially since the 2026 failures offer no clarity on their condition. Examine the exhaust system for rust or loose mounts, and verify fluid levels—oil, coolant, and brake fluid—since stagnant vehicles can suffer from contamination or degradation. Structural integrity should also be confirmed, as corrosion or impact damage may not have been noted in tests lacking defects. The absence of recorded issues does not equate to a clean bill of health; this vehicle demands hands-on verification before purchase.