2023 Mazda CX-60 Takumi Phev Auto 2.5L Hybrid electric (clean) · HSZ 3071

The vehicle most recently passed its MOT on 12 August 2026, indicating it currently meets the minimum legal safety standards for road use. However, the maintenance trend is concerning due to a comprehensive list of advisories affecting every tyre on the vehicle. The fact that all four tyres are simultaneously worn close to the legal limit suggests a reactive rather than proactive approach to vehicle upkeep, which may indicate that other consumable items have been similarly overlooked. With a recorded mileage of 29,965 miles over approximately three years, the vehicle has averaged nearly 10,000 miles per annum. This represents a typical usage profile for a modern family vehicle and suggests a balanced mix of driving environments. At this mileage, the drivetrain and suspension components should remain in good condition, although the vehicle is entering the phase where initial factory-fit consumables begin to reach the end of their primary service life. The primary area of concern is the condition of the tyres, as the DVSA records explicitly note edge cracking, cuts, and tread wear across all four corners. This combination of wear and perishing suggests the tyres may have been subjected to incorrect pressures or have degraded due to age and environmental exposure. During a test drive, you should listen for increased road noise or a humming sensation, and visually inspect the sidewalls for any bulges or deep cuts that could compromise structural integrity. A full replacement of the tyre set should be factored into the purchase price as an immediate requirement. Beyond the tyres, the buyer should verify the service history to ensure that calendar-based maintenance has been performed regardless of the mileage. Given the PHEV powertrain, it is essential to check for brake disc corrosion or binding calipers, as regenerative braking often means the physical friction brakes are underutilised and prone to surface rust. Additionally, inspect the 12V auxiliary battery health and ensure the hybrid system is operating without faults. Finally, check the suspension bushes and coil springs for any signs of premature wear or leakage, ensuring the vehicle handles predictably without any clunks or instability.