2006 Husqvarna TE 510 0.5L Petrol · HX06 AFU

This Husqvarna TE 510 has maintained a stable roadworthiness record over the past two years, with the most recent MOT on 21 January 2026 confirming no defects at 3,016 miles. The only prior issues—registration plate non-compliance (a purely administrative failure) and minor drive chain sprocket wear alongside a lightly leaking front shock absorber—were resolved by the time of the 2022 test. While the 2022 entry shows both a pass and a concurrent fail for the same vehicle (likely a duplicate entry error), the 2025 and 2026 tests reflect consistent compliance with no recurring mechanical faults. That said, the persistent note on the front shock absorber in 2022 suggests it may require closer inspection now, particularly if the vehicle has remained stationary for extended periods. The recorded mileage of 3,016 miles over nearly two decades—roughly 150 miles annually—is exceptionally low for a vehicle of this age. There is a notable gap between the 2022 and 2025 MOTs, spanning three years with no recorded movement, which could imply prolonged storage. Such low usage may reduce wear on high-mileage components like the drive chain or brakes, but it also raises concerns about potential degradation from prolonged inactivity, such as seized suspension seals or degraded rubber parts. The lack of intermediate mileage readings makes it impossible to confirm whether the vehicle was ever actively ridden during this period. A buyer should prioritise an immediate inspection of the front suspension, particularly the near-side shock absorber, which showed oil leakage in 2022. The drive chain sprocket, while not excessively worn at the time of testing, should be checked for further wear or stretching, especially if the vehicle has been stationary. Given the prolonged storage period, the tester should also examine the battery, fuel system, and any rubber components (such as throttle cables or clutch linkage) for signs of drying or cracking. The absence of recent mechanical faults does not preclude hidden issues from neglect, and a thorough pre-purchase inspection is essential to verify the vehicle’s current condition beyond the MOT’s scope.