2016 Ford Focus 1.0L Petrol · HX16 KLE

The maintenance trend for this 2016 Ford Focus appears stable, culminating in a clean pass at 86,349 miles on 3 May 2025. The most recent test recorded zero defects, indicating the vehicle met all required safety and emissions standards at that time. A preceding test on 30 April 2025 at the identical mileage shows a failure, yet curiously lists no recorded defects, which typically points to an aborted or incomplete inspection rather than a mechanical fault. The subsequent pass confirms the car was quickly rectified or re-presented successfully. Overall, the recent history demonstrates a mechanically sound vehicle with no recurring faults or advisories to raise concern. The mileage accumulation reveals a distinct shift in usage patterns over the vehicle's lifespan. Between the April 2023 test at 42,565 miles and the April 2024 test at 67,556 miles, the Focus covered roughly 25,000 miles, suggesting intensive use, likely motorway commuting or business travel. This dropped to approximately 18,800 miles over the following year, reaching 86,349 miles by May 2025. Since that last test, the recorded mileage has remained static for over fourteen months, strongly implying the vehicle has been standing idle or driven very minimally. While the annualised average of 8,635 miles aligns with typical use, the recent stagnation warrants attention regarding components affected by prolonged inactivity. Given the recent high mileage followed by a period of stagnation, a buyer should inspect components susceptible to seizing or degrading from disuse. Check the brake discs for surface corrosion and ensure the calipers are not binding, as stationary vehicles frequently suffer from pad adhesion and uneven rust buildup. Tyres must be examined for flat spots or sidewall cracking, particularly if the car has remained stationary under load for extended periods. Suspension bushes and coil springs require close scrutiny for deterioration, especially given the heavy mileage accrued in 2023 and 2024. Finally, verify the exhaust system for corrosion and check fluid levels, as long periods of inactivity can cause moisture accumulation in the oil and fuel systems.