2016 Ford Focus 1.0L Petrol · J14 AAW

A consistent record of clean MOT certificates defines this vehicle's recent history, with the most recent test on 04 October 2025 showing no defects. Since 2021, the car has maintained a stable roadworthiness profile, having moved past a single instance of tyre wear advisories to achieve three consecutive years of passing without any recorded failures or further advisories. This trend indicates that the mechanical components inspected during the annual testing cycle have remained within legal parameters for the last four years. The recorded mileage of 44,569 miles against a 2016 registration suggests a low annual usage pattern of approximately 4,457 miles per year. While this lower accumulation typically implies less wear on high-friction components such as brake pads, discs, and clutch assemblies, it can also indicate periods where the vehicle has been stationary. Mechanically, such low-intensity usage means that while the drivetrain may have lower total mileage, components subject to environmental degradation or rubber perishability should be monitored closely. Given the specific advisory for nearside and offside front tyre wear recorded in March 2021, a prospective buyer should inspect the current condition of the front tyres to ensure they have been replaced and that the wear pattern is uniform. Uneven wear on the edges of the tyres often points to alignment issues or worn suspension bushes. During a test drive, pay close attention to the steering response and listen for any knocking or clunking sounds when navigating uneven surfaces or speed bumps, which could indicate wear in the suspension linkages or ball joints. Beyond the tyre history, the absence of any recorded structural corrosion or fluid leaks in the recent MOT history is a positive indicator for the vehicle's current state. However, because the vehicle has been driven significantly less than the UK average, it is prudent to check for any signs of uneven braking or pulling to one side, which can sometimes occur when components are used infrequently. Ensure the brake pedal feel is firm and consistent, with no excessive travel or vibration through the pedal during deceleration.