1991 Reliant Rialto 0.8L Petrol · J257 MOD
1991 Reliant Rialto (0.8L, petrol). First registered 19 Nov 1991. Recorded mileage 72,182 miles. MOT expired on 20 Jul 2023.
- Make & Model
- RELIANT RIALTO
- Year / Origin
- 1991
- Safety Recall
- Unknown
- MOT Status
- Expired on 20 Jul 2023
- Road Tax
- —
- Recorded Mileage
- 72,182 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
J257 MOD Key Findings
- 2 MOT tests recorded
- Latest MOT passed on 22/07/2022
- 72,182 miles recorded at latest MOT
- 1 historical MOT failure
- 1 defect noted at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
J257 MOD MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
2 MOT tests are recorded for this 1991 Reliant Rialto (J257 MOD) between May 2022 and July 2022.
The record contains 1 pass and 1 failure.
The most recent test on 22 July 2022 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (1 issue), Lighting (1 issue), Bodywork (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 3 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Body component insecure bonnet (6.2.1 (a) (i))”; “Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c))”; “All direction indicators not working (4.4.1 (a) (ii))”.
J257 MOD Mileage History
- 27/05/202272,182 mi
- 22/07/202272,182 mi
Average of roughly 0 miles per year across 2 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Reliant Reliant Rialto
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: RELIANT RIALTO
Known issues reported by owners and MOT testers.
- Front Suspension Swing-Arm and Steering Bush Wear(Moderate)
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head Warpage(Moderate)
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate Corrosion(Moderate)
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (J257 Series)
Vehicles registered in the same regional DVLA batch as J257MOD.
FORD
FIESTA
HONDA
CIVIC
LAND ROVER
DEFENDER
MZ
ETZ301
RENAULT
TRAFIC
PEUGEOT
309
KAWASAKI
ZZ-R1100
TRIUMPH
FIAT
DUCATO
MK
INDY 1
CITROEN
ZX
HONDA
C90
RELIANT RIALTO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1991 model year cars.
- Front Suspension Swing-Arm and Steering Bush WearModerate
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head WarpageModerate
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate CorrosionModerate
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.