1992 Rover Metro 1.4L Diesel · J834 UOV
1992 Rover Metro (1.4L, diesel). First registered 01 May 1992. Recorded mileage 48,324 miles. MOT expired on 10 Aug 2010. Currently declared SORN.
- Make & Model
- ROVER METRO
- Year / Origin
- 1992
- Safety Recall
- Unknown
- MOT Status
- Expired on 10 Aug 2010
- Road Tax
- SORN
- Recorded Mileage
- 48,324 mi
- ULEZ Compliance
- Non-Compliant (Pre-Euro 6 Diesel)
- Fuel & Engine
- DIESEL · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
J834 UOV Key Findings
- 7 MOT tests recorded
- Latest MOT passed on 31/07/2009
- 48,324 miles recorded at latest MOT
- 2 historical MOT failures
- 2 defects noted at the latest MOT
- Recurring tyres items (2 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
J834 UOV MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
7 MOT tests are recorded for this 1992 Rover Metro (J834 UOV) between August 2005 and July 2009.
The record contains 5 passes and 2 failures.
The most recent test on 31 July 2009 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Tyres (2 issues), Windscreen (2 issues), Lighting (1 issue), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 3 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)”; “Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)”; “Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)”.
J834 UOV Mileage History
- 11/08/200538,195 mi
- 04/08/200641,697 mi+3,502 mi
- 01/08/200744,669 mi+2,972 mi
- 01/08/200744,669 mi
- 30/07/200846,790 mi+2,121 mi
- 28/07/200948,324 mi+1,534 mi
- 31/07/200948,324 mi
Average of roughly 2,552 miles per year across 7 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rover Rover Metro
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROVER METRO
Known issues reported by owners and MOT testers.
- Hydragas Suspension Depressurisation and Fluid Pipe Corrosion(Serious)
The Rover Metro replaced the Austin Metro's harsh, separate suspension units with interconnected front-to-rear Alex Moulton Hydragas displacers and interconnected fluid pipes. Over time, the internal nitrogen gas charge in the displacer spheres gradually permeates through the rubber diaphragm, and external steel connection pipes rot in British winter salt. This causes the car to sag onto its bump stops, ruining the ride quality and destroying front tyre alignment. Regassing displacers requires specialist equipment and rare replacement units.
- K-Series Cylinder Head Gasket Failure (Early SPi and MPi)(Serious)
The Rover Metro debuted Rover's all-aluminium K-Series engine (1.1 8v, 1.4 8v, and 1.4 16v GTi). Early K-Series engines utilised plastic locating dowels between the cylinder block and head, a small 3.5-litre cooling capacity, and an elastomer-bead cylinder head gasket. Thermal expansion differentials and minor coolant loss quickly cause the head gasket to blow, warping the lightweight aluminium cylinder head and contaminating the engine oil with coolant.
- A-Pillar, Sill, and Rear Wheel Arch Corrosion(Moderate)
While the Rover Metro received galvanised zinc coating on certain vulnerable lower panels compared to the Austin original, British road salt takes a heavy toll on the A-pillars, lower sills, jacking points, and rear wheel arch returns. Water also penetrates behind the front wing seals and drains into the A-pillar box section, rotting the door hinge mountings and lower windscreen corners. Structural rust in these zones is a primary cause of MOT failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (J834 Series)
Vehicles registered in the same regional DVLA batch as J834UOV.
TOYOTA
CELICA
KAWASAKI
EX
MITSUBISHI
G.T.O.
NISSAN
FIGARO
LAND ROVER
DEFENDER
RENAULT
5
MAZDA
EUNOS
BMW
316
NISSAN
FIGARO
BMW
3 SERIES
HONDA
NC30
VOLKSWAGEN
LT
ROVER METRO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1992 model year cars.
- Hydragas Suspension Depressurisation and Fluid Pipe CorrosionSerious
The Rover Metro replaced the Austin Metro's harsh, separate suspension units with interconnected front-to-rear Alex Moulton Hydragas displacers and interconnected fluid pipes. Over time, the internal nitrogen gas charge in the displacer spheres gradually permeates through the rubber diaphragm, and external steel connection pipes rot in British winter salt. This causes the car to sag onto its bump stops, ruining the ride quality and destroying front tyre alignment. Regassing displacers requires specialist equipment and rare replacement units.
- K-Series Cylinder Head Gasket Failure (Early SPi and MPi)Serious
The Rover Metro debuted Rover's all-aluminium K-Series engine (1.1 8v, 1.4 8v, and 1.4 16v GTi). Early K-Series engines utilised plastic locating dowels between the cylinder block and head, a small 3.5-litre cooling capacity, and an elastomer-bead cylinder head gasket. Thermal expansion differentials and minor coolant loss quickly cause the head gasket to blow, warping the lightweight aluminium cylinder head and contaminating the engine oil with coolant.
- A-Pillar, Sill, and Rear Wheel Arch CorrosionModerate
While the Rover Metro received galvanised zinc coating on certain vulnerable lower panels compared to the Austin original, British road salt takes a heavy toll on the A-pillars, lower sills, jacking points, and rear wheel arch returns. Water also penetrates behind the front wing seals and drains into the A-pillar box section, rotting the door hinge mountings and lower windscreen corners. Structural rust in these zones is a primary cause of MOT failure.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.