1975 Lancia Fulvia 1.3L Petrol · JAR 69N
1975 Lancia Fulvia (1.3L, petrol). First registered 30 Jun 1975. Recorded mileage 71,989 miles. MOT expired on 14 Oct 2026. Taxed until 01 Feb 2027.
- Make & Model
- LANCIA FULVIA
- Year / Origin
- 1975
- Safety Recall
- Unknown
- MOT Status
- Expired on 14 Oct 2026
- Road Tax
- Taxed (01 Feb 2027)
- Recorded Mileage
- 71,989 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.3L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
JAR 69N Key Findings
- 4 MOT tests recorded
- Latest MOT passed on 16/10/2025
- 71,989 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
JAR 69N MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
4 MOT tests are recorded for this 1975 Lancia Fulvia (JAR 69N) between June 2022 and October 2025.
The record contains 4 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
JAR 69N Mileage History
- 29/06/202271,249 mi
- 17/07/202371,373 mi+124 mi
- 25/06/202471,452 mi+79 mi
- 16/10/202571,989 mi+537 mi
Average of roughly 224 miles per year across 4 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Lancia Lancia Fulvia
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: LANCIA FULVIA
Known issues reported by owners and MOT testers.
- Front Subframe and Mounting Outrigger Corrosion(Serious)
The front subframe carries the entire weight of the canted V4 engine, transmission, steering idlers and transverse leaf suspension. Water and mud thrown up by the front tyres settle into the enclosed mounting boxes, rear outriggers and inner wing attachment points, causing severe structural rot. In advanced stages of corrosion, structural stress causes vertical cracks to propagate through the front wheel arches and allows the subframe to twist under cornering loads.
- Twin Solex Carburettor Out-of-Sync and Fuel Washing(Moderate)
Most production Fulvias breathe through twin sidedraught Solex (or Dell'Orto/Weber) carburettors feeding the narrow-angle V4. Over time, vibration, linkage wear and degraded rubber mounting blocks cause the throttle butterflies to fall out of synchronisation. An unbalanced fuel mixture causes lumpy idling, persistent hesitation off idle, bore fuel washing, fouled spark plugs and hot-starting difficulties on UK pump fuels.
- Brake Caliper Seizure and Handbrake Linkage Seizure(Moderate)
Fulvias rely on four-wheel disc brakes: early Series 1 cars use Dunlop calipers without servo assistance, while Series 2 and 3 models use Girling calipers with an independent rear handbrake caliper mechanism. Infrequent use and damp UK garage storage lead to caliper piston pitting, binding pads, uneven braking balance and seized handbrake pivots, resulting in severe drag and overheated rear discs.
- Cooling System Silt Accumulation and Water Pump Weep(Serious)
The narrow-angle V4 relies on a compact water pump and narrow aluminium cylinder head cooling jackets. Over decades of ownership, infrequent coolant flushing and the use of tap water cause silt buildup and galvanic corrosion in the radiator and waterways. Impellers erode and the mechanical water pump seal weeps, causing creeping temperatures in traffic, localized cylinder head hotspots and eventual head gasket failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (JAR6 Series)
Vehicles registered in the same regional DVLA batch as JAR69N.
LANCIA FULVIA Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1975 model year cars.
- Front Subframe and Mounting Outrigger CorrosionSerious
The front subframe carries the entire weight of the canted V4 engine, transmission, steering idlers and transverse leaf suspension. Water and mud thrown up by the front tyres settle into the enclosed mounting boxes, rear outriggers and inner wing attachment points, causing severe structural rot. In advanced stages of corrosion, structural stress causes vertical cracks to propagate through the front wheel arches and allows the subframe to twist under cornering loads.
- Twin Solex Carburettor Out-of-Sync and Fuel WashingModerate
Most production Fulvias breathe through twin sidedraught Solex (or Dell'Orto/Weber) carburettors feeding the narrow-angle V4. Over time, vibration, linkage wear and degraded rubber mounting blocks cause the throttle butterflies to fall out of synchronisation. An unbalanced fuel mixture causes lumpy idling, persistent hesitation off idle, bore fuel washing, fouled spark plugs and hot-starting difficulties on UK pump fuels.
- Brake Caliper Seizure and Handbrake Linkage SeizureModerate
Fulvias rely on four-wheel disc brakes: early Series 1 cars use Dunlop calipers without servo assistance, while Series 2 and 3 models use Girling calipers with an independent rear handbrake caliper mechanism. Infrequent use and damp UK garage storage lead to caliper piston pitting, binding pads, uneven braking balance and seized handbrake pivots, resulting in severe drag and overheated rear discs.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.