2014 Mazda CX-5 2.2L Diesel · JF14 HAM

The vehicle’s most recent MOT test on 2026-02-26—just five months ago—confirms it passed without defects, though it was retested the day prior after a failure at the same mileage (85,048). This pattern of consecutive tests at identical mileage suggests a deliberate attempt to clear minor oversights rather than underlying mechanical issues. No recurring faults or advisories appear in the record, and the absence of defects in the 2025 and 2023 tests indicates a stable maintenance history. However, the double test in February 2026 warrants closer scrutiny of components prone to marginal failures, such as brake binding or minor suspension wear, which often require repeated attention. The recorded mileage of 85,048 miles over 12 years aligns with typical usage for this age, averaging around 7,087 miles annually. There is a notable gap between the 2023 and 2025 tests, spanning 18 months with only 2,075 miles logged—suggesting the vehicle may have been stored or used lightly during that period. The rapid accumulation of 8,062 miles between the 2025 and 2026 tests, however, implies recent regular use, which could accelerate wear on high-mileage components like suspension bushes, brake pads, and drivetrain fluids. The lack of advisories in prior tests means no prior warnings of corrosion or structural concerns, but the extended storage period raises questions about potential fluid degradation or rust development in underbody areas. Given the clean MOT history, the most critical areas for an in-person inspection should focus on components that frequently cause retests: the braking system, particularly for binding calipers or uneven pad wear, and the suspension for worn or leaking bushes or coil springs. The double test in February 2026 hints at potential minor oversights, so verifying brake fluid condition, hydraulic lines, and wheel bearings would be prudent. Additionally, the prolonged storage period between 2023 and 2025 necessitates checking for corrosion in wheel arches, subframes, and exhaust systems, as well as the integrity of fluid reservoirs and seals. A thorough examination of tyre tread depth and lateral wear patterns is essential, given the high mileage and the vehicle’s typical usage profile.