1992 Lancia Delta 2.0L Petrol · K224 ENM
1992 Lancia Delta (2.0L, petrol). First registered 29 Jul 1992. Recorded mileage 18,917 km. MOT valid until 03 Aug 2027. Taxed until 01 Aug 2027.
- Make & Model
- LANCIA DELTA
- Year / Origin
- 1992 · Borehamwood
- Safety Recall
- Unknown
- MOT Status
- Valid until 03 Aug 2027
- Road Tax
- Taxed (01 Aug 2027)
- Recorded Odometer
- 18,917 km
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 2.0L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
K224 ENM Key Findings
- 3 MOT tests recorded
- Latest MOT passed on 05/08/2026
- 18,917 km recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
K224 ENM MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
3 MOT tests are recorded for this 1992 Lancia Delta (K224 ENM) between May 2025 and August 2026.
The record contains 3 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
K224 ENM Odometer History
- 16/05/202518,914 km
- 24/02/202618,915 km+1 km
- 05/08/202618,917 km+2 km
Average of roughly 2 km per year across 3 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Lancia Lancia Delta
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Excellent
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: LANCIA DELTA
Known issues reported by owners and MOT testers.
- Chassis and Windscreen Pillar Stress Cracking(Serious)
The Delta's monocoque chassis was originally conceived for a modest 1.3-litre family hatchback. Channeling over 200bhp through stiff 4WD suspension, aggressive anti-roll bars and modern low-profile tyres subjects the shell to immense torsional loads. Severe stress cracking frequently develops at the upper corners of the windscreen pillars under the rubber seal, around the front bulkhead chassis leg attachments, down at the bottom of the B-pillars and around the rear suspension turret perimeters.
- Timing Belt and Balancer Shaft Belt Failure(Serious)
The turbocharged 2.0-litre Lampredi engine features twin overhead camshafts and twin counter-rotating balancer shafts driven by independent toothed rubber belts. High-temperature engine bay conditions, high-lift camshaft modifications and tight clearances accelerate belt degradation. If the cambelt or balancer belt snaps or skips teeth due to aged tensioner bearings, the valves impact the pistons, resulting in bent valves, broken guides and major engine rebuild costs.
- Roof Trailing Edge and Windscreen Frame Corrosion(Moderate)
Unlike earlier Lancias, Integrales received improved factory cathodic dipping, but specific moisture traps remain notorious. Rainwater and road grit collect in the channel seal where the tailgate hinges mount to the roof trailing edge, causing bubbling and structural disintegration that weakens the tailgate mountings. Similar corrosion takes hold behind the windscreen rubber seal and around the front lower scuttle, requiring painstaking metal fabrication to rectify.
- Upper Sump Gasket Oil Leaks and Low-Oil Turbo Starvation(Serious)
The transverse Lampredi turbo installation is prone to oil weeping from the two-piece sump gasket and rocker cover seals. In aggressive driving, the turbocharged twin-cam engine consumes up to 0.5 to 1.0 litre of synthetic oil per 1,000 miles. Because the turbocharger oil feed gallery sits high up on the block, running with low oil levels rapidly starves the turbo bearings and big-end bearings, resulting in bearing seizure and turbo failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (K224 Series)
Vehicles registered in the same regional DVLA batch as K224ENM.
MAZDA
323
FIAT
DUCATO 1.3 CAB
SAAB
900
VOLKSWAGEN
GOLF
FORD
TRANSIT
TOYOTA
HI LUX
YAMAHA
VIRAGO
NISSAN
SKYLINE
YAMAHA
TTR 250
TALBOT
CAMPER
YAMAHA
XV1100
LAND ROVER
DEFENDER
LANCIA DELTA Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1992 model year cars.
- Chassis and Windscreen Pillar Stress CrackingSerious
The Delta's monocoque chassis was originally conceived for a modest 1.3-litre family hatchback. Channeling over 200bhp through stiff 4WD suspension, aggressive anti-roll bars and modern low-profile tyres subjects the shell to immense torsional loads. Severe stress cracking frequently develops at the upper corners of the windscreen pillars under the rubber seal, around the front bulkhead chassis leg attachments, down at the bottom of the B-pillars and around the rear suspension turret perimeters.
- Timing Belt and Balancer Shaft Belt FailureSerious
The turbocharged 2.0-litre Lampredi engine features twin overhead camshafts and twin counter-rotating balancer shafts driven by independent toothed rubber belts. High-temperature engine bay conditions, high-lift camshaft modifications and tight clearances accelerate belt degradation. If the cambelt or balancer belt snaps or skips teeth due to aged tensioner bearings, the valves impact the pistons, resulting in bent valves, broken guides and major engine rebuild costs.
- Roof Trailing Edge and Windscreen Frame CorrosionModerate
Unlike earlier Lancias, Integrales received improved factory cathodic dipping, but specific moisture traps remain notorious. Rainwater and road grit collect in the channel seal where the tailgate hinges mount to the roof trailing edge, causing bubbling and structural disintegration that weakens the tailgate mountings. Similar corrosion takes hold behind the windscreen rubber seal and around the front lower scuttle, requiring painstaking metal fabrication to rectify.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.