1993 Peugeot 106 1.1L Petrol · K464 HWK
1993 Peugeot 106 (1.1L, petrol). First registered 26 Mar 1993. Recorded mileage 76,234 miles. MOT expired on 14 Sept 2024.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1993 · Borehamwood
- Safety Recall
- Unknown
- MOT Status
- Expired on 14 Sept 2024
- Road Tax
- —
- Recorded Mileage
- 76,234 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.1L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
K464 HWK Key Findings
- 2 MOT tests recorded
- Latest MOT passed on 16/09/2023
- 76,234 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
K464 HWK MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
2 MOT tests are recorded for this 1993 Peugeot 106 (K464 HWK) between September 2022 and September 2023.
The record contains 2 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
K464 HWK Mileage History
- 09/09/202275,354 mi
- 16/09/202376,234 mi+880 mi
Average of roughly 864 miles per year across 2 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (K464 Series)
Vehicles registered in the same regional DVLA batch as K464HWK.
TRIUMPH
DAYTONA
MAZDA
MX-5
AUDI
80
KAWASAKI
EX500A6
MAZDA
MX-5
LAND ROVER
DEFENDER
VOLVO
400 SERIES
HONDA
CB250
TALBOT
EXPRESS
PEUGEOT
VOLKSWAGEN
TRANSPORTER
FIAT
PANDA
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1993 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.