2014 Citroen C3 1.0L Petrol · K66 RAB

The most recent MOT tests on this 2014 Citroën C3, conducted just four months ago on 9 March 2026, reveal a concerning anomaly: the vehicle was tested twice at the same mileage (51,981) and failed both attempts without any recorded defects. This suggests either a technical error in the testing process or, more likely, a deliberate attempt to bypass the MOT by resubmitting the same vehicle without addressing underlying issues. The preceding tests in March 2025 and March 2024 also show identical patterns—each year featuring a pass and a fail at the same mileage, again with no defects logged. This repetition implies a lack of transparency or a systematic failure to disclose genuine faults, which raises serious questions about the vehicle’s true condition. The recorded mileage of 51,981 miles over approximately 12 years—roughly 4,332 miles annually—suggests unusually light usage for a vehicle of this age. The most recent gap between tests spans 16 months (from March 2025 to March 2026), which is well beyond the standard 12-month MOT interval. While low mileage can indicate careful ownership, the repeated failed tests without defects are far more concerning. The absence of any mileage progression between the two March 2026 tests further suggests the vehicle may have been stationary or driven minimally during this period, potentially accelerating issues like battery discharge, suspension stiffening, or brake corrosion. Given the lack of defects in the MOT history, no specific recurring faults are documented, but the repeated failures warrant an immediate, thorough inspection of critical components. Focus on the braking system , particularly the rear calipers and discs, as binding or uneven wear is often undetectable without a dynamic test. The suspension —including coil springs, bushes, and dampers—should be checked for uneven sagging or excessive play, as low mileage can mask gradual degradation. Exhaust emissions may also warrant verification, as repeated MOT failures without explanation could indicate tampering or a failing catalytic converter. Finally, inspect for structural corrosion , especially around wheel arches, sills, and the subframe, as prolonged inactivity can accelerate rust formation. The absence of advisories in the MOT history does not guarantee these areas are sound; a professional inspection is essential to confirm the vehicle’s true roadworthiness.