2022 Volkswagen Polo Life 1.0L Petrol · KA13 TTY

The vehicle most recently passed its MOT on 12 November 2025, although it is important to note that this followed an initial failure on the same day. This failure was categorized as dangerous due to the nearside front tyre tread being worn down to the cords. While the vehicle is currently roadworthy, the fact that a tyre reached a dangerous state of wear before the owner noticed suggests a lack of proactive maintenance regarding safety critical consumables, indicating a reactive rather than preventative approach to vehicle upkeep. With a recorded mileage of 30,726 miles over approximately four years, the vehicle has averaged roughly 7,682 miles per annum. This represents a typical usage profile for a modern hatchback, meaning the drivetrain, suspension, and engine components should not be subject to excessive wear. There are no significant gaps in the mileage record to suggest prolonged periods of standing, which reduces the likelihood of seized brake calipers or perished rubber seals often found in low usage examples. Given the specific nature of the MOT failure and the advisory regarding uneven edge wear on the front tyres, a prospective buyer should pay close attention to the vehicle's wheel alignment and suspension geometry. During a test drive, feel for any pulling to one side or an unstable steering feel, and physically inspect the current tyres for irregular wear patterns across the tread. Such uneven wear often points to worn suspension bushes or incorrect tracking, which can lead to premature tyre failure and compromised handling if not corrected. Beyond the tyre history, the buyer should verify the service record to ensure that oil changes and filter replacements have been carried out according to the manufacturer's calendar based intervals, regardless of the moderate mileage. It is advisable to inspect the brake discs for any signs of heavy scoring or surface corrosion and to check the health of the 12V battery, as modern Volkswagens are sensitive to voltage drops. Finally, ensure that all fluid levels are correct and that there are no visible leaks around the engine bay or suspension struts.