2008 Hyundai I10 Comfort 1.1L Petrol · KHZ 8581

The 2008 Hyundai i10 Comfort shows a stable roadworthiness trend, having passed both its most recent MOT test on 8 November 2022 and the preceding one on 10 September 2021 without any recorded defects or advisories. The vehicle’s compliance with all mandatory checks at those intervals suggests no obvious recurring mechanical failures, though the absence of defects does not preclude hidden wear—particularly in areas like suspension bushes, coil springs, or brake caliper binding, which are common in this model age. The latest test occurred just over three years ago, which is beyond the standard 12-month MOT validity window, meaning the vehicle has been operating without official inspection for nearly 2.5 years as of July 2026. This extended period without a test introduces an inherent risk, as undetected issues—such as corrosion in wheel arches or degraded suspension components—could compromise structural integrity or handling. The recorded mileage of 97,926 miles over an 18-year span equates to approximately 5,440 miles annually, a figure significantly lower than the average for a vehicle of this age. This suggests either light usage or prolonged periods of inactivity, which could mitigate some wear but also indicates potential neglect in fluid changes, tyre rotation, or minor servicing. The gap between tests—roughly 14 months—does not reveal rapid mileage accumulation, nor does it show any sudden spikes that might imply aggressive driving. However, the lack of service records beyond MOTs means critical intervals for oil changes, timing belt inspections, or brake fluid renewal cannot be confirmed. The low mileage does not absolve the need for thorough inspection of high-wear items, as corrosion and material fatigue often progress independently of mileage. Given the sparse MOT history, a buyer should prioritise an in-person examination of the suspension system, particularly the rear subframe and bushings, which are prone to deterioration in this model. The absence of advisories in past tests does not guarantee these components are intact, so visual inspection for cracks, excessive play, or uneven tyre wear is essential. Brake discs and calipers should be checked for lateral wear or binding, as these are frequently overlooked until failure occurs. Additionally, the underbody should be scrutinised for corrosion in wheel arches, sills, and the subframe, as rust can compromise structural integrity without affecting MOT passability. The vehicle’s age and the extended time since the last test warrant particular attention to fluid levels (brakes, power steering, coolant) and the condition of hoses, belts, and the exhaust system for leaks or excessive corrosion.