2022 Audi A3 Technik 30 Tfsi 1.0L Petrol · KP72 WTF

A consistent record of clean roadworthiness defines this vehicle, with the most recent MOT passed on 04/11/2025 showing no defects or advisories. This single recorded test indicates a stable baseline of mechanical compliance for a vehicle of this age, though the absence of historical data prior to the first required test means there is no long-term trend of component wear or recurring issues to evaluate. The recorded mileage of 21,574 miles suggests a relatively low annual usage pattern of approximately 5,394 miles per year. Mechanically, this level of accumulation typically results in less wear on high-friction components such as brake discs, pads, and tyres, as well as less fatigue on suspension bushes and coil springs compared to higher-mileage vehicles. However, such low annual mileage can also mean the vehicle has spent significant periods stationary, which may impact the condition of rubber seals or the consistency of fluid circulation, though no specific defects were noted in the latest inspection. Given the lack of recorded advisories or failures, there are no specific mechanical faults to investigate through the MOT history. On a test drive, focus on confirming the absence of any subtle issues that a standard MOT might not capture, such as checking for any steering pull or vibrations through the steering wheel at motorway speeds, which could indicate tyre or wheel alignment issues. Additionally, listen for any unusual knocks or rattles when navigating uneven surfaces to ensure the suspension linkages and bushes remain in the condition implied by the clean test result. Final verification should include a physical inspection of the brake pedal feel to ensure there is no sponginess or judder under braking, and a check of the engine bay for any signs of fluid weeping that may have occurred since the last inspection. While the MOT record is clear, the low mileage profile warrants a close look at the overall cleanliness of the drivetrain and any visible seals to ensure that the infrequent usage has not led to any minor seepage.