2021 Peugeot Traveller Allure Bluehdi S/S A 2.0L Diesel · KW70 XGP

This Peugeot Traveller has maintained a clean MOT history with no defects recorded across its most recent three tests, all of which passed without fail. The January 2026 test at 42,862 miles confirms the vehicle remains roadworthy under current DVSA standards, though the absence of advisories or minor faults means no specific areas of concern were flagged by the tester. The consistency of these passes suggests the vehicle has been subject to regular servicing and basic maintenance, though the lack of advisories also implies some components may have been overlooked unless addressed privately. The most recent test was conducted just six months ago, which is well within the optimal window for assessing roadworthiness, though a thorough mechanical inspection remains essential. The mileage progression indicates a steady usage pattern, averaging approximately 8,572 miles annually over the past five years. The recorded mileage at each test—23,995 miles in January 2024, 34,128 miles in January 2025, and 42,862 miles in January 2026—shows a consistent increase without abrupt jumps or prolonged periods of inactivity. This suggests the vehicle has been driven regularly rather than stored, which is generally favourable for components like suspension bushes and drivetrain fluids. However, the lack of intermediate MOTs or service records means there is no visibility into whether critical intervals, such as brake fluid changes or timing belt inspections, were adhered to privately. Given the clean MOT history, a buyer should prioritise inspecting high-wear consumables that are not routinely checked during MOTs, such as the condition of the suspension bushes and coil springs, which may exhibit fatigue over 42,000 miles. The absence of advisories on brakes in recent tests does not guarantee there has been no deterioration—binding calipers or unevenly worn discs could still exist without triggering a fail. Similarly, the exhaust emissions system, while passing MOTs, should be visually inspected for leaks or corrosion, particularly around the catalytic converter and turbocharger, given the vehicle’s diesel powertrain. Structural integrity, including underbody corrosion and wheel bearing condition, should also be scrutinised, as these are not tested during MOTs but can pose long-term risks. Finally, the tyre tread depth and lateral wear patterns warrant immediate verification, as the MOT only checks for a minimum of 1.6mm—actual remaining life could be significantly lower.