2021 Audi A1 1.0L Petrol · KY21 ABC

The vehicle passed its most recent MOT on 18 May 2026. While the overall history shows a consistent pass rate, the maintenance trend is currently worsening. The 2024 test was entirely clean, the 2025 test noted wearing front brake pads, and the 2026 test revealed multiple tyre defects. This progression suggests a decline in preventative maintenance over the last two years, shifting from a pristine condition to a state where several key consumables are reaching the end of their service life simultaneously. With 36,339 miles recorded over approximately five years, the vehicle has averaged roughly 7,268 miles per annum. This is considered typical usage for a modern hatchback and suggests a balanced duty cycle. This level of mileage generally avoids the pitfalls of extreme high-wear drivetrain stress while also preventing the degradation often seen in vehicles that suffer from prolonged periods of standing, such as seized calipers or perished seals. The most recent inspection highlights significant concerns regarding the rear tyres. Both the nearside and offside rear tyres are noted as perishing, cracking, and worn close to the legal limit, with a nail specifically identified in the nearside rear. The buyer should immediately inspect the tyre sidewalls for fine cracks, which indicate rubber degradation, and check the tread depth across the width of the tyre to identify uneven wear. During a test drive, listen for abnormal road noise or vibrations from the rear axle and ensure there is no instability, as perishing rubber and structural damage from a nail can compromise grip and safety. Regarding the braking system, the 2025 advisory for thin front brake pads should be investigated to determine if they have since been replaced. If the pads remain worn, the buyer may experience a longer pedal travel or a slight shudder under heavy braking. It is recommended to check the brake disc surfaces for scoring or lip formation. Given the vehicle's age, the buyer should also verify the service history to ensure that oil and filter changes have been performed according to the manufacturer's calendar-based intervals to maintain engine longevity and overall mechanical integrity.