1993 Reliant Rialto 0.8L Petrol · L582 FJO
1993 Reliant Rialto (0.8L, petrol). First registered 17 Sept 1993. Recorded mileage 32,162 miles. MOT expired on 21 Nov 2025. Currently declared SORN.
- Make & Model
- RELIANT RIALTO
- Year / Origin
- 1993 · Stanmore (Wimbledon)
- Safety Recall
- Unknown
- MOT Status
- Expired on 21 Nov 2025
- Road Tax
- SORN
- Recorded Mileage
- 32,162 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
L582 FJO Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 22/11/2024
- 32,162 miles recorded at latest MOT
- 2 historical MOT failures
- 5 defects noted at the latest MOT
- Recurring brakes items (7 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
L582 FJO MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1993 Reliant Rialto (L582 FJO) between October 2022 and November 2024.
The record contains 3 passes and 2 failures.
The most recent test on 22 November 2024 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (7 issues), Lighting (4 issues), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 10 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Central Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))”; “Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))”; “Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))”.
L582 FJO Mileage History
- 28/10/202232,162 mi
- 11/11/202232,162 mi
- 21/11/202332,162 mi
- 22/11/202432,162 mi
- 22/11/202432,162 mi
Average of roughly 0 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Reliant Reliant Rialto
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: RELIANT RIALTO
Known issues reported by owners and MOT testers.
- Front Suspension Swing-Arm and Steering Bush Wear(Moderate)
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head Warpage(Moderate)
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate Corrosion(Moderate)
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (L582 Series)
Vehicles registered in the same regional DVLA batch as L582FJO.
VOLKSWAGEN
POLO
LAND ROVER
DEFENDER
TOYOTA
MR2
YAMAHA
FZR1000
VAUXHALL
CORSA
SUBARU
284 4WD PICK UP
TALBOT
EXPRESS 1000 P
MITSUBISHI
MINICA
DUCATI
M900
FORD
TRANSIT
KAWASAKI
ZEPHYR 750
ROVER
MINI
RELIANT RIALTO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1993 model year cars.
- Front Suspension Swing-Arm and Steering Bush WearModerate
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head WarpageModerate
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate CorrosionModerate
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.