2019 Audi Q3 S Line 35 TDI S-A 2.0L Heavy oil · LA12 WAT

The vehicle most recently passed its MOT on 4 March 2026 with no defects or advisories recorded. This indicates a high standard of current roadworthiness and suggests a stable maintenance trend, as the vehicle met all DVSA safety and emissions requirements without any noted areas of concern. With a recorded mileage of 49,271 miles over approximately seven years, the vehicle has averaged roughly 7,039 miles per annum. This is considered typical usage for this model and suggests a balanced duty cycle that avoids the extreme wear associated with high-mileage motorway use, while also avoiding the stagnation issues often found in very low-mileage examples. Mechanically, the drivetrain and interior should show moderate wear consistent with this usage profile. Given the clean MOT history, the prospective buyer should shift focus toward age-related degradation and calendar-based maintenance. It is essential to inspect the tyre sidewalls for signs of perishing or fine cracking, as rubber compounds degrade over time regardless of tread depth. The brake discs should be examined for surface corrosion or uneven wear, and the pedal feel during a test drive should be monitored for any shudder or binding calipers, which can occur if the vehicle has spent extended periods stationary. Particular attention should be paid to the service history to verify that oil changes and filter replacements have been performed at the correct intervals. For this TDI engine, the buyer must confirm the status of the timing belt and water pump, as these are critical time-sensitive components that may require replacement based on age even if the mileage is relatively low. Finally, the health of the 12V battery and the condition of the suspension bushes should be verified to ensure the vehicle remains mechanically sound for continued use.