2005 KIA Sedona 2.9L Diesel · LB05 ECJ
2005 KIA Sedona (2.9L, diesel). First registered 24 Jun 2005. Recorded mileage 166,322 miles. MOT valid until 19 Jul 2027.
- Make & Model
- KIA SEDONA
- Year / Origin
- 2005 · Stanmore (North London)
- Safety Recall
- Unknown
- MOT Status
- Valid until 19 Jul 2027
- Road Tax
- —
- Recorded Mileage
- 166,322 mi
- ULEZ Compliance
- Non-Compliant (Pre-Euro 6 Diesel)
- Fuel & Engine
- Diesel · 2.9L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
LB05 ECJ Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 21/07/2026
- 166,322 miles recorded at latest MOT
- 2 historical MOT failures
- 7 defects noted at the latest MOT
- Recurring suspension items (15 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
LB05 ECJ MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2005 Kia Sedona (LB05 ECJ) between June 2024 and July 2026.
The record contains 3 passes and 2 failures.
The most recent test on 21 July 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Suspension (15 issues), Lighting (13 issues), Brakes (9 issues), Steering (4 issues), Tyres (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 46 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))”; “Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))”; “Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))”.
LB05 ECJ Mileage History
- 11/06/2024154,144 mi
- 13/06/2024154,160 mi+16 mi
- 01/07/2025159,389 mi+5,229 mi
- 08/07/2025159,782 mi+393 mi
- 21/07/2026166,322 mi+6,540 mi
Average of roughly 5,776 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Kia Sedona
Our database tracks 5 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: KIA SEDONA
Known issues reported by owners and MOT testers.
- 2.9 CRDi High-Pressure Fuel Pump Internal Disintegration and Swarf Contamination(Serious)
The Delphi common-rail high-pressure injection pump fitted to the 2.9-litre CRDi diesel engine is prone to internal mechanical degradation. As the internal cam and rollers break down, they shed microscopic metallic swarf into the fuel lines, contaminating the common fuel rail, clogging the fuel filter, and jamming the diesel injectors. Early warning signs include engine power surging, severe hesitation under acceleration, and prolonged cranking before starting. Left unresolved, the metal debris circulates through the entire fuel system, requiring a full fuel tank flush or replacement alongside new pump and injectors.
- Automatic Transmission Output Speed Sensor Failure and Third-Gear Limp Mode(Moderate)
On automatic Sedona models, the electronic transmission output speed sensor mounted atop the gearbox casing suffers from heat fatigue and internal circuit failure. When signal output to the transmission control module drops out, the gearbox abruptly triggers failsafe mode, locking into third gear while cruising on the motorway and refusing to shift into top gear or overdrive. Drivers also report erratic gear hunting, delayed engagement, and severe jolts when shifting into Drive at a standstill. Renewing the speed sensor and wiring plug is essential to restore proper shift operation.
Vehicle & Plate History
Other vehicles on this plate
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (LB05 Series)
Vehicles registered in the same regional DVLA batch as LB05ECJ.
FORD
FIESTA
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
HONDA
CIVIC
JAGUAR
XKR
KIA SEDONA Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2005 model year cars.
- 2.9 CRDi High-Pressure Fuel Pump Internal Disintegration and Swarf ContaminationSerious
The Delphi common-rail high-pressure injection pump fitted to the 2.9-litre CRDi diesel engine is prone to internal mechanical degradation. As the internal cam and rollers break down, they shed microscopic metallic swarf into the fuel lines, contaminating the common fuel rail, clogging the fuel filter, and jamming the diesel injectors. Early warning signs include engine power surging, severe hesitation under acceleration, and prolonged cranking before starting. Left unresolved, the metal debris circulates through the entire fuel system, requiring a full fuel tank flush or replacement alongside new pump and injectors.
- Automatic Transmission Output Speed Sensor Failure and Third-Gear Limp ModeModerate
On automatic Sedona models, the electronic transmission output speed sensor mounted atop the gearbox casing suffers from heat fatigue and internal circuit failure. When signal output to the transmission control module drops out, the gearbox abruptly triggers failsafe mode, locking into third gear while cruising on the motorway and refusing to shift into top gear or overdrive. Drivers also report erratic gear hunting, delayed engagement, and severe jolts when shifting into Drive at a standstill. Renewing the speed sensor and wiring plug is essential to restore proper shift operation.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.