2008 Vauxhall Zafira Life 1.6L Petrol · LHZ 4285

A consistent record of clean MOT certificates over the last six years defines this vehicle's recent history, following a single failure in early 2020. Since that failure, the car has achieved five consecutive passes without any recorded advisories, with the most recent test on 08 July 2026 showing no defects. This trend indicates a period of stable roadworthiness where no recurring issues with emissions, lighting, or structural integrity have been flagged by the testing stations. The recorded mileage of 119,780 miles for an 18-year-old vehicle equates to an average annual accumulation of approximately 6,654 miles. This usage pattern is consistent with typical long-distance or mixed-use profiles for a vehicle of this age. Mechanically, this level of mileage suggests that while the drivetrain and major components have been subject to regular operation, they have not been subjected to the high-intensity wear associated with heavy commercial or high-mileage commuter use. Given the absence of recorded advisories regarding suspension bushes, brake pipes, or subframe corrosion in the recent history, a test drive should focus on verifying that these components remain in their current state. Listen for any dull knocks or clunks from the front or rear suspension when traversing uneven surfaces, which could indicate wear in the shock absorbers or linkage components not yet captured by an MOT inspector. Pay close attention to the steering response for any pulling to one side or vibrations through the steering wheel that might suggest issues with wheel alignment or steering rack components. The braking system should be evaluated for any pedal judder or unevenness during deceleration, which would point toward warped brake discs or sticking calipers. Although no issues with braking efficiency or fluid leaks have been documented, the lack of recent advisories means the buyer should still verify that the pedal feel remains firm and consistent. Monitoring for any visible oil misting around the engine bay or exhaust manifold during the inspection is also advisable to ensure that the clean recent record remains representative of the vehicle's current mechanical state.