2010 Vauxhall Corsa 1.2L Petrol · LS60 JUA

The Vauxhall Corsa’s most recent MOT test on 28 August 2024—just under two years ago—confirmed full roadworthiness with no defects recorded at 127,894 miles. This suggests the vehicle has maintained a stable mechanical condition over the past 18 months, with no recurring failures or advisories to indicate worsening issues. The absence of major faults in the last two tests, including the September 2023 retest at the same mileage, implies that any prior concerns were either resolved or non-critical. However, the duplicate test dates in 2023 (both August 8 and August 11) warrant scrutiny, as they indicate a failed initial inspection that was later passed without explanation—this could imply a temporary oversight rather than a persistent problem. The recorded mileage of 127,894 miles over 16 years aligns with typical usage patterns for this model, averaging around 8,000 miles annually. There are no significant gaps or abrupt jumps in mileage between tests, though the 2022-2023 period shows a slight acceleration from 112,611 to 116,237 miles in just over a year. This suggests consistent driving rather than neglect or prolonged storage. The lack of pre-MOT servicing records means some wear items—such as brake pads, suspension bushes, and timing belt components—may be approaching their expected service intervals, particularly given the vehicle’s age. Given the absence of documented faults in recent tests, a buyer should prioritise a thorough inspection of high-wear components that aren’t routinely checked during MOTs. Focus on the suspension for worn coil springs, deteriorated bushes, or binding ball joints, as these often develop gradually without immediate failure. The braking system should be scrutinised for uneven disc wear, glazed pads, or binding calipers, especially if the vehicle exhibits uneven stopping or a pull to one side. Structural integrity is another critical area; check for corrosion at wheel arches, sills, and the subframe, as this model is prone to rust progression over time. Finally, verify the condition of the exhaust system for leaks or excessive corrosion, particularly around joints and mounts, as this can affect emissions and structural stability.