2025 Audi Q8 Black Edition Tfsi E Quat A 3.0L Hybrid electric (clean) · LS75 VML

Without any MOT entries on the DVSA database, there is no documented evidence of this 2025 Audi Q8 Black Edition having been examined for roadworthiness since its registration. The absence of recorded passes, advisories or failures means the mechanical story of the car cannot be established from MOT data, leaving its compliance status entirely unverified. Mileage information is also missing, so an assessment of annual kilometre accumulation or any unusual usage patterns cannot be made. The lack of recorded mileage prevents any inference about wear rates for drivetrain, suspension or tyre life, and it highlights a gap that a prospective buyer should seek to fill through service records or a detailed odometer reading at the point of sale. Given the complete lack of MOT history, a comprehensive pre‑purchase inspection is essential. Pay particular attention to the suspension system—listen for clunking or knocking over bumps that could indicate worn bushings or deteriorating coil springs—and inspect the steering rack for any binding. Test the braking system by applying firm, progressive pressure; note any pedal sponginess, judder, or uneven pull that might reveal warped discs, glazed pads or compromised brake lines. Verify that all exterior lighting functions correctly and that the exhaust emits no excessive smoke or unusual noises, which could point to engine or emission‑control issues. A thorough electrical check is also advisable, as modern Audi models integrate numerous control modules. Confirm that the infotainment screen, climate controls, and driver‑assist features respond without delay, and watch for warning lights on the instrument cluster during a short drive. Finally, request a battery health readout and confirm that the high‑voltage system charges correctly, especially if the vehicle has been idle for any length of time, to avoid unexpected power‑related failures after purchase.