2017 Mercedes-Benz Sprinter 3.0L Diesel · LX67 AFE

The 2017 Mercedes-Benz Sprinter has maintained a consistent MOT pass record across five consecutive tests, with the most recent inspection on 2025-11-21 at 167,552 miles confirming no defects. This suggests the vehicle has been kept free of major mechanical failures during its annual testing cycle, though the absence of advisories or defects does not preclude underlying wear—particularly given the high mileage. The regular passing pattern implies that previous owners adhered to MOT requirements, but it does not guarantee proactive maintenance beyond statutory checks. The latest test was conducted just six months ago, which is within the acceptable window for a used-car buyer, though a pre-purchase inspection remains essential to verify the absence of non-MOT-captured issues. The recorded mileage of 167,552 miles over nine years equates to approximately 18,600 miles annually, which is above the average for a commercial or light-duty van of this age. The progression shows consistent mileage accumulation without significant gaps: from 91,668 miles in December 2021 to 167,552 miles in November 2025, the vehicle has covered roughly 16,000 miles each year. While this suggests active use rather than prolonged neglect, the sustained high mileage raises expectations for wear on high-stress components such as suspension bushes, coil springs, and brake calipers. The lack of advisories in prior MOTs does not rule out gradual deterioration, particularly in areas not routinely inspected under MOT regulations. Given the vehicle’s age and mileage, a buyer should prioritise a thorough examination of the suspension system, including the condition of bushes, dampers, and coil springs for signs of cracking or excessive play. The braking system warrants close scrutiny, especially the rear calipers and discs, as binding or uneven wear is often a late-stage issue in high-mileage vans. Structural integrity should also be assessed, focusing on the chassis for corrosion—particularly around wheel arches, sills, and exhaust mounts—where moisture intrusion is common. Engine bay components, such as hoses, belts, and fluid levels, should be checked for degradation, as these are critical for preventing sudden failures. The absence of MOT advisories does not eliminate the risk of hidden issues, so a pre-purchase inspection by a qualified mechanic is strongly advised.