2015 Volvo XC60 2.4L Diesel · MJ65 HHP

This Volvo XC60 has maintained a consistent MOT pass record across five consecutive annual tests, with the most recent inspection on 2025-09-19 confirming no defects. The absence of advisories or failings over this period suggests the vehicle has undergone regular, compliant roadworthiness checks without recurring mechanical issues. However, the lack of any recorded faults does not preclude hidden wear—particularly in high-mileage components like suspension bushes, coil springs, or brake calipers—which may only manifest under closer scrutiny. The recorded mileage of 139,184 miles over approximately 11 years equates to an average of 12,653 miles annually, a rate significantly above the UK average for a vehicle of this age. This suggests either consistent heavy use or prolonged periods of inactivity followed by rapid accumulation. Notably, there are no gaps in MOT history, but the steady mileage progression implies the previous owner prioritised regular servicing to meet test requirements. The absence of advisories in prior tests does not rule out deferred maintenance—such as delayed brake pad replacements or suspension servicing—if the vehicle was driven aggressively or stored unsuitably between checks. Given the high mileage, a prospective buyer should prioritise an independent inspection of the suspension system, including rear wheel bearings and front/rear bushes, as these are common failure points in Volvo XC60s at this mileage. Binding brakes or uneven tyre wear would indicate worn calipers or uneven pad thickness, while excessive play in the steering or uneven suspension travel could signal degraded coil springs or worn stabiliser links. Corrosion at wheel arches, subframes, or exhaust mounts should also be examined, particularly if the vehicle has been exposed to salted roads or coastal conditions. The drivetrain and exhaust emissions system appear compliant with recent tests, but a full fluid check (brake, power steering, transmission, and differential) is advisable to confirm no leaks or contamination.