2007 Volvo C70 2.4L Diesel · MM07 PRM

The vehicle's most recent MOT test on 14 July 2023 at 113,101 miles passed without defects, but the preceding test on 28 June 2023 at 113,097 miles revealed critical suspension issues: a fractured offside rear coil spring and corroded near-side rear coil spring. These faults suggest a worsening trend in the suspension system, as the previous test in November 2021 at 112,846 miles already flagged a slight play in the near-side rear anti-roll bar linkage ball joint. The 2023 failures also highlight recurring brake and steering issues, with binding rear brakes and a missing steering rack gaiter, indicating inconsistent maintenance. The vehicle's maintenance history shows a pattern of intermittent failures, with no clear resolution of structural or mechanical defects. The overall roadworthiness is uncertain, with recurring faults suggesting unresolved mechanical issues. The vehicle's mileage of 113,101 miles over 19 years implies an average of roughly 5,953 miles per year, which is unusually low for its age. This suggests either very light use or prolonged periods of inactivity, which could have contributed to the suspension and brake issues. The MOT history is sparse, with only two tests in the past five years, and the most recent failures occurred just four months apart, indicating a recent decline in maintenance standards. The lack of consistent upkeep and the low mileage accumulation rate raise concerns about the vehicle's long-term structural integrity. A buyer should prioritise inspecting the suspension system, particularly the rear coil springs and anti-roll bar linkages, as the MOT history shows recurring issues with excessive play and structural damage. The binding rear brakes and missing steering rack gaiter also require attention, as these faults suggest inconsistent maintenance. The oil leaks and parking brake inefficiencies in previous tests indicate potential fluid-related issues that may need addressing. Given the vehicle's low mileage and sparse maintenance record, a thorough mechanical inspection is essential to assess the extent of the structural and mechanical defects.