1952 Bentley 4.6L Petrol · MOL 300

This 1952 Bentley presents a stable and well-maintained roadworthiness profile. The most recent MOT, conducted on 18 April 2023 at 38,899 miles, passed with zero defects recorded. This clean sheet, combined with the resolution of significant mechanical faults noted in the 2010 failure, indicates an improving maintenance trend. The vehicle has been kept in a mechanically sound state for over a decade, with no advisories or failures logged since August 2010. The recorded mileage of 38,899 miles over approximately 74 years equates to an average of just 526 miles annually, confirming exceptionally light use. Between the November 2013 test at 38,330 miles and the April 2023 test at 38,899 miles, the vehicle covered only 569 miles over nearly a decade. This suggests prolonged periods of standing, which demands careful attention to perishable components such as rubber bushes, brake seals, and fuel system integrity. The sparse mileage accumulation also means structural corrosion from moisture ingress is a greater concern than mechanical wear from use. Buyers should inspect the front suspension closely, given the historical faults. The 2010 failure flagged excessive play in the offside front axle king pin and a rear drag link end ball joint, while the 2011 test noted slight movement at the offside front wishbone bush. Although these were resolved, aged rubber suspension bushes on a vehicle of this vintage are prone to perishing during long static periods. A thorough check of the steering linkage and king pin bushes for slack is essential. The braking system also warrants close scrutiny. The 2010 failure recorded both service and parking brake efficiency below requirements. On a car standing for long intervals, binding calipers, corroded brake discs, and deteriorated flexible hoses are common failure points that can compromise braking efficiency. Finally, examine the exhaust system thoroughly. A minor exhaust gas leak was flagged in 2011, and on a 74-year-old vehicle, corroded manifolds, cracked pipework, and leaking flange gaskets are highly likely. Any evidence of exhaust gas leakage at the manifold or downpipe joints should be treated as a priority repair due to the risk of fumes entering the cabin. While the MOT record is reassuring, the combination of extreme age and minimal recent use means a physical inspection focused on perishable rubber components, brake serviceability, and structural corrosion is strongly advised.