2012 Scania P230 Diesel · NJ12 WDN

The Scania P230 has maintained a clean MOT history across five consecutive tests, all passing without defects. The most recent inspection, conducted just ten months ago on 2025-07-22 at 717,993 miles, confirms no outstanding issues. This consistency suggests the vehicle has undergone regular servicing or has been operated in a manner that avoids critical wear patterns. However, the absence of advisories or minor faults in any test means there is no historical data to indicate whether preventative maintenance has been applied to high-wear components like suspension bushes, drivetrain seals, or exhaust systems. The recorded mileage of 717,993 miles over 14 years—approximately 51,285 miles annually—is unusually high for a vehicle of this age, particularly given its commercial use. The most significant mileage jump occurred between the 2021-04-23 (690,126 miles) and 2022-04-30 (698,334 miles) tests, a 8,208-mile increase in just over a year, followed by another substantial rise to 702,977 miles by 2023-04-25. While this suggests intensive use, the lack of MOT advisories or defects implies that either the vehicle was well-maintained during these periods or that critical components have been replaced privately without trace. The even spacing of tests—roughly 12 months apart—indicates compliance with MOT requirements, though it does not reveal whether intermediate servicing was performed. Given the vehicle’s age and mileage, a buyer should prioritise an in-person inspection of suspension components, particularly the coil springs, shock absorbers, and steering dampers, for signs of fatigue or leakage. The brakes, while not flagged in MOTs, warrant scrutiny for uneven wear, glazing, or corrosion on the rear discs and calipers, especially if the vehicle has been operated in mixed conditions. Exhaust emissions systems should be checked for leaks or excessive smoke, as diesel engines of this age are prone to DPF or EGR failures. Structural integrity is another concern; the chassis rails, subframe, and wheel arches should be examined for corrosion, particularly if the vehicle has spent time in wet or salted environments. The lack of MOT advisories does not preclude hidden issues, so thoroughness in these areas is essential.