2017 Toyota RAV4 2.5L Hybrid electric (clean) · NL67 UMS

The 2017 Toyota RAV4 demonstrates a generally sound roadworthiness status with a maintenance trend that shows proactive correction of wear items rather than chronic structural neglect. In the most recent test on November 20, 2025, at 56,508 miles, the vehicle initially failed due to severely worn offside front brake pads measuring under 1.5 millimetres alongside a heavily worn brake disc. However, remedial action was taken immediately on the exact same day, resulting in a clean pass at 56,508 miles. This quick turnaround indicates that the previous keeper addressed critical braking faults promptly rather than allowing hazardous components to remain on the road. The vehicle has covered a modest 56,508 miles across its nine-year lifespan, averaging roughly 6,279 miles annually, which sits comfortably within typical UK driving parameters. Mileage accumulation progressed at a steady pace from 18,362 miles in October 2020 to 29,914 miles by October 2022. A slightly higher jump occurred between October 2023 at 37,390 miles and October 2024 at 44,529 miles, followed by another increase to 56,506 miles by November 2025. There are no concerning gaps or suspicious plateaus in the testing cadence, confirming consistent annual use and regular interaction with UK testing stations. A physical inspection should focus heavily on the braking and suspension systems, given the recurring patterns in the history. The October 2023 test at 37,390 miles flagged pitting and scoring on both rear brake discs, as well as wear in the nearside and offside rear upper suspension arm trailing bushes. Although those suspension bushes did not exhibit excessive movement at the time, they are now three years older and warrant close scrutiny for play or cracking during a ramp inspection. Buyers should also verify the condition of the front brake components replaced in November 2025 and check that the rear discs have either been renewed since 2023 or still retain adequate thickness above minimum manufacturer tolerances.