2007 Vauxhall Corsa 1.4L Petrol · NU07 EXG

This Vauxhall Corsa has demonstrated a stable roadworthiness trend over the past two years, with the most recent MOT test on 16 January 2026 confirming no defects. The vehicle has passed its annual tests without fail since January 2024, despite two failed tests in 2024 and 2025—both of which were retested and subsequently passed. This suggests the vehicle was either repaired promptly or had minor, non-recurring issues addressed between tests. The lack of advisories or repeated failures on critical systems indicates no obvious pattern of neglect, though the irregular test dates in 2024 and 2025 warrant scrutiny of whether maintenance was consistently scheduled. The recorded mileage of 78,567 miles over nearly 19 years equates to approximately 4,135 miles annually, which is unusually low for a vehicle of this age. The gap between tests in 2024 and 2025—where two consecutive MOTs were required—implies the vehicle may have been stationary for extended periods, potentially accelerating corrosion risks or degrading fluid-based systems like brakes and power steering. The absence of mileage between January 2024 and January 2025 (a full year with no movement) is particularly concerning, as prolonged inactivity can lead to seized components, degraded tyres, or structural corrosion that isn’t always visible until movement resumes. Given the sparse MOT history, a prospective buyer should prioritise an inspection of suspension integrity, particularly the rear suspension bushes and coil springs, which are common failure points in this model. The repeated retests in 2024 and 2025—despite no recorded defects—raise questions about whether minor issues were overlooked or if the vehicle was driven between tests without proper servicing. Brake components, including calipers, pads, and discs, should be examined for uneven wear or binding, especially if the vehicle was left unused for long stretches. Structural corrosion, particularly around wheel arches, sills, and the subframe, should be thoroughly checked, as static conditions exacerbate rust development. Fluid levels in the brake system, power steering, and engine should also be verified, as stagnation can lead to contamination or component failure.